Lincat CG6nFL [5/12] Installation

IS205 ECN3592

NOTE

SERIAL NUMBER

Each appliance manufactured at Lincat has a unique identifying number found in the top right

hand corner of the data plate attached at the rear of the appliance. Please record that number in

the space provided should it be required for future reference.

Serial Number

MARK OF CONFIDENCE

Every singe product that leaves our factory bears a serial plate showing the assembler’s

initials. It’s a mark of confidence we have in our people and our manufacturing process.

INSTALLATION

SITING

The installer must ensure that all regulations are met and that there is an unobstructed minimum

distance of 1000mm from the top of the flue to the ceiling, which must be of non-combustible

material.

The appliance should be installed on a level surface ensuring the unit is stable and firmly located.

Any partitions, walls or kitchen furniture in close proximity must be of non-combustible materials

and not be closer than 50mm from the sides and rear of the flue.

GAS SUPPLY AND CONNECTION

Connection is at the rear of the unit via a 1/2" G male thread.

Gas supply hose and connection shall comply with local regulations, and shall be periodically

examined and replaced as necessary.

When making the connection to the appliance an isolating cock should be fitted into the supply line

close to the unit, for emergency shutdown or servicing purposes.

SUPPLY PRESSURES

 To gain access to the gas pressure test nipple remove the debris drawer. The nipple is situated

behind the fascia panel on the right of the appliance.

 Remove the blanking screw and attach a pressure gauge to the boss of the test nipple.

 Light both burners and set to maximum.

 Adjust the operating pressure at the governor. See table.