Beko CSG 52110 GW [13/96] Installation and connection

Содержание

Installation and connection Product can only be installed and connected in accordance with the statutory installation rules S Do not install the product next to refrigerators or freezers The heat emitted by the product will increase the energy consumption of cooling appliances Carry the product with at least two persons Product must be placed directly on the floor It must not be placed onto a base or a pedestal ___________________________ F Do not use the door and or handle to carry I 1 Jor move the product The door handle or hinges get damaged Power cable of your product must comply with the values in Technical specifications table P T lPower cable plug must be within easy reach I 1 Jaffer installation do not route it above the k Jhob H There is the risk of electric shock 3lug the power cable into the socket Gas connection DANGER Product can be connected to gas supply system only by an authorised and qualified person Electrical connection Connect the product to a grounded outlet line protected by a fuse of suitable capacity as stated in the Technical specifications table Have the grounding installation made by a qualified electrician while using the product with or without a transformer Our company shall not be liable for any damages that will arise due to using the product without a grounding installation in accordance with the local regulations ______ A DANGER The product must be connected to the mains supply only by an authorised and qualified person The product s warranty period starts only after correct installation Manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorised persons A DANGER The power cable must not be clamped bent or trapped or come into contact with hot parts of the product A damaged power cable must be replaced by a qualified electrician Otherwise there is risk of electric shock short circuit or fire The mains supply data must correspond to the data specified on the type label of the product The rating plate is either seen when the door or the lower cover is opened or it is located at the rear wall of the unit depending on the unit type DANGER Before starting any work on the electrical installation disconnect the product from the mains supply Risk of explosion or toxication due to unprofessional repairs Manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorised persons n DANGER Before starting any work on the gas installation disconnect the gas supply There is the risk of explosion Gas adjustment conditions and values are stated on labels or ion type label E our product is equipped for natural gas G Natural gas installation must be prepared before installing the product If necessary interchange the sharp hose tip and the blind plug at the rear of your oven by selecting a suitable place on basis of the location of the natural gas valve 1 2 Blind plug Hose tip There must be a flex pipe at the outlet of the installation for the natural gas 13 EN