Suunto Vector HR [28/61] Hrm memory

21

2.7.2 How to Start the Countdown Timer

During the training interval, the set heart rate limits are in use and the heart rate information is calculated and stored in the HRM memory.

When the time has been counted down, a beep is heard, and simultaneously a new interval will begin.

If the recovery interval has a value other than zero, this interval will now be counted down. During the recovery interval the heart rate is

displayed, but not measured nor stored for later calculations and will not effect max/min/average heart rate readings nor the time spent

in/above/below the target zone readings. The limits established are not in use during this interval either.

If the recovery interval has been set to “0”, another training interval is immediately started. This interval is repeated as many times as

set in the setup of the countdown timer. When the last interval is completed, a triple-beep is heard signifying to the user the end of



2.8 HRM MEMORY

The HRM memory sub mode stores the maximum, minimum, and average heart rates during selected intervals (training or recovery),

as well as the time spent in, above and below selected heart rates (target zones). If the heart rate goes beyond the selected zone,

an alarm sounds.

To view the HRM Memory, in the HRM mode, PRESS the [Select] button three times to enter this submode.

In the HRM Memory mode, there are six display screens.

1. In the rst display (main display) (Fig. 8):

• Field 1 displays the year of the start date;

• Field 2 displays the start time; and