Siemens TK52001 [17/100] Settings and displays

Содержание

en 4 Coffee dispensing button strong coffee Degree This button is used to dispense strong coffee When the button is pressed the coffee is ground brewed and dispensed into the cup 1 2 3 4 Water hardness German dH 1 7 8 15 16 23 24 30 French fH 1 13 14 27 28 42 43 54 5 Steam generation button The steam button O generates steam for foaming or warming 6 Steam dispensing dial Hot water or steam can be dispensed by turning the dial to or O To dispense steam the steam generation button must be pressed frst see Steam for foaming milk 7 LED display The various LEDs indicate the following on The water tank is empty and needs to be filled on Trays full Empty and replace them flashing Trays missing Reinsert them on Run the service programme see Service programme flashing Service programme in operation flashing Turn dial tO IV on Turn dial to 0 bS ö S s s 0 0 Settings and displays Setting the water hardness It is important that the water hardness be set correctly so that the appliance indicates accurately when the descaling programme should be run The factory setting is a water hardness of 4 You can check the water hardness by asking your local water supplier Switch the appliance to eco mode Hold down the steam button O for at least 5 seconds The number of LEDs 7a t5 b c S d that light up indicates the selected water hardness Press the steam button repeatedly until the correct number of LEDs is lit e g for a hardness of3 the LEDs 7a b and c b5 i3 S light up Press the button eco once The selected number of LEDs should light up briefly this indicates that the desired setting has been saved successfully If a water fiter optional extra Order No 461732 is used the water hardness should be set to 1 Note If no button is pressed within 90 seconds the appliance switches to eco mode without saving the new settings In this case the previous water hardness setting is retained The appliance must be rinsed when a filter is frstused and after changing the fiter Fill the tank with water up to the 0 5 I mark Place a suitable container approx 0 5 I under the nozzle 8 Set the dial 6 to When water stops coming out of the nozzle 8 set the dial back to O Fill the water tank and the water pipes see Switching on the appliance I Filling the system 13