Philips HD 7751/00 [7/144] Using the appliance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Philips HD 7751/00 [7/144] Using the appliance

Philips HD 7751/00 [7/144] Using the appliance
7
D Note:
When you switch off the grinder, the number
of cups and the strength setting are not
shown on the display.
8 Press the start/standby button to start the
brewing process (Fig. 7).
9 Let the appliance operate until all the water
has owed into the jug.
• The coffeemaker produces 5 beeps when
the brewing process is nished.
10 Press the start/standby button to stop the
brewing/ keep-warm process. (Fig. 5)
11 Empty the jug.
5 Using the appliance
5.1 Filling the water reservoir
1 Open the water reservoir lid and ll the water
reservoir with the required amount of cold
water (Fig. 3).
There are indications for 2 to 10 cups (275ml
to 1375ml) on the water level window and
on the jug. You can use these indications to
determine how much water to put in the
water reservoir. Keep in mind that the amount
of brewed coffee will be slightly less, since
ground coffee absorbs water.
E
Tip:
Use the jug to ll the water reservoir with the
required amount of water.
D
Note: (Fig. 8)
Do not ll the water reservoir beyond the
10-cup indication, otherwise water spills from
the opening at the back.
4 Beforerstuse
4.1 Flushing the appliance
You need to ush the coffeemaker once before
rst use.
1 Put the mains plug in the wall socket.
2 Set the on/off switch on the back of
the appliance to ‘I’ to switch on the
appliance (Fig. 2).
• The start/standby button, the display light
up and the appliance beeps.
D
Note:
If you do not press any button within 5
minutes, the appliance goes into standby
mode. In this case, the display goes out and
only the start/standby button stays on to
indicate that the appliance is still switched on.
In standby mode, you can press any button to
reactivate the appliance.
3 Open the water reservoir lid. Fill the water
reservoir with fresh cold water up to the
10-cup indication (Fig. 3).
D
Note:
Do not put coffee beans or ground coffee in
the appliance.
4 Close the water reservoir lid.
5 Place the jug on the hotplate (Fig. 4).
D
Note:
Make sure the lid is on the jug and the jug is
properly placed on the hot plate. The spout of
the jug has to face forward into the appliance.
If the lid is not on the jug or the jug is not
properly placed, the drip stop function is
automatically activated (see chapter ‘Using the
appliance’, section ‘Drip stop function’).
6 Press the start/standby button (Fig. 5).
• The appliance beeps and the freshness
indicator appears on the display.
7 Press the pre-ground coffee button to switch
off the grinder (Fig. 6).
• The button lights up when you press it.
ENGLISH

Содержание

Похожие устройства

Скачать