Vitek VT-3536 [5/32] English

SETTING UP

Set up the transmitter(s) before setting up the

receiver

1. Remove battery cover and insert batteries

to start setup

AA size batteries (included) Insert batteries

into compartment observing proper polarity

2. HOUSE CODE will flash for 8 seconds

3. Select HOUSE CODE (1-15) by pressing

C/F and pressing SET to CHANNEL setting

If you have multiple transmitters for a single

receiver, set each transmitter to the same House code

4. CHANNEL will flash for 8 seconds

5. Select CHANNEL(1-3) by pressing C/F

If you have multiple transmitters for a single receiver, set

each transmitter to a different Channel code

6. Humidity & Temperature will alternatively display on LCD

screen

7. Select °C or °F of Temperature by pressing C/F

• Use a different house code if your weather station detects other signals

from neighboring sources

• Factory default: house code = 01 and channel = 01

1. Remove battery cover

2. 2 AA size batteries (included)

3. Insert batteries into compartment,

observing proper polarity; replace cover

LOW BATTERY INDICATION:

Receiver: Low battery indicator will display

continuously when batteries need replac-

ing. On transmitter, will be displayed

ENGLISH

Setting up transmitter(s)

Setting up receiver

3536.qxd 30.08.2004 14:48 Page 4