Vitek VT-3536 [7/32] English

WIRELESS TRANSMISSION

Environmental factors and signals from other household devices, such as

remote entry controls, security systems, and computers, may interfere with

the wireless transmission of this product and cause temporary reception

loss. This is normal and does not affect the general performance of this

product. Stable reception will resume once the interference ends.

For optimal performance:

• Place the receiver and remote transmitter side by side about 1 metre

apart, and allow the receiver and remote transmitter to synchronize for 10

minutes before you place the remote transmitter outdoors.

• The remote transmitter should be placed in a dry shaded area.

NOTE: Fog andmist will not harm the remote transmitter but direct rain

must be avoided.

• Mount the remote transmitter upright avoiding metallic objects and

frames, such as window sills. Verify that there are no obstacles like a

transmission tower or steep hill that can cause interference and blockage

between the remote transmitter and receiver.

• Place the receiver unit at least 2 metres away from any electrical devices,

such as your television set, computer, cordless phone, or any radio con-

trolled equipment.

• 1Replace unit(s) with fresh batteries when the Low Battery Indicator lights

up.

• Refer to the SETTING UP section.

• You may need to reposition the remote transmitter to a different location

and/or closer to the receiver for the best transmission.

ENGLISH

3536.qxd 30.08.2004 14:48 Page 6