Tunturi Classic Bike U 1.0 [7/10] Console

34 35

Bike 1.0 - OWNER’S MANUAL ENGLISH

HANDLEBAR

Attach the cable coming from the frame tube to the

connector at the bottom of the handlebar.

Ensure that the joint is securely locked by gently pulling the

wire. Thread the wire carefully inside the frame tube and

push the handlebar support tube into place inside the

frame tube so that the fastening screws are on the front of

the tube.

CONSOLE

1. Connect the cables from the handlebar to the

corresponding connectors of the console. Insert the

connected cables into the console, but make sure they

are not damaged when the console is attached.

2. Place the console in position at the end of the

handlebar support tube and attach the console using two

mounting screws.

SEAT

Loosen the seatholder locking screw and turn the upper

locking lever so that it is aligned with the equipment.

Place the seat into position on the grooves of the lower

locking lever. Turn the upper locking lever towards the top

of the seat rails and lock the seat by tightening the locking

screw.

Bike 1.0_MANUAL.indd 35 9/12/2012 3:03:25 PM