NordicTrack NTEVEX78612 Инструкция по эксплуатации онлайн [9/32] 297106

7. While another person holds the Console (13)

near the Handlebar (5), connect the wires on the

Console to the Upper Wire (59), the Pulse Wire

(61), and the Receiver Wire (16).

Insert the excess wire into the Handlebar (5).

Tip: Avoid pinching the wires. Attach the

Console (13) to the Handlebar (5) with four M4 x

16mm Screws (90).

Avoid pinching

the wires

8. Orient the Upright (4) assembly and the Pivot

Cover (12) as shown.

Slide the Pivot Cover (12) upward to the

Handlebar (5). Tip: Bend and flex the Pivot

Cover slightly to slide it over the Handlebar.

Attach the Pivot Cover (12) to the Handlebar

(5) and the Console (13) with four M4 x 16mm

Screws (90).

Pivot the Handlebar (5) until the hole in the

Handlebar is aligned with an adjustment hole in

the Upright (4).

Tighten an Adjustment Knob (27) into the

Handlebar (5) and an adjustment hole in the

Upright (4). Make sure that the Adjustment

Knob is engaged in one of the adjustment

holes.

Hole

Adjustment

Holes