Weissgauff HV 312 B [5/20] Activating the pause function

-Cooking zone timer 1..99 min: This function can only be

activated as long as a cooking is active (stage < 0; display dot).

Audible signal w ith timing, four cooking zones to be cut off are

freely program mable.

Setting a timer value:

By adjustment with the slider area.

Primarily the adjustment of the first digit takes place and

thereafter the adjustment of the second digit.

Within 10sec after the adjustm ent of the second digit the value

might be reset. (Illuminated display dot in the timer display and in

case of a cooking z one specific timer a blinking assigned LED).

In case of an active timer display the timer value may be set to [0]

directly by pressing [0] on the slider area (left side)

Switching off an active tim er:

A timer can be switched of by setting its value to 0.

A stand alone timer can be switched of by a double actuation of

the pow er key “1”.

Timer Stand-Alone:

If the control unit is switched on (all cooking zone displays show

[0]), the stand-alone timer may be activated by pressing the timer

select key. The timer display shows “00“. The decimal dot on the

timer display flashes. The timer is cut off after 10 sec (black

display) if no further settings are made. In case of a timer value is

set with no activation of a cooking zone within 10sec, the cooking

zone displays are cut off (interposing relays are also cut off).

Possible optic warnings for hot cooking zones [H] are displayed

permanently

As long as the timer is selected (display dot flashes for 10 sec) it

can be set. The setting range is 0 -99 minutes in single steps; by

Slider area.

Directly after the timer value is set countdown starts with the last

set value. The timer is deselected autom atically after 10 sec and

the timer display indicates the timer value. After expiring of the

set time an acoustic signal is given and the timer display flashes

„00“.

The acoustic signal is terminated

-after 2 min and/or

-by actuating any key.

Thereafter timer display stops blinking and extinguishes. Possible

optic warnings for hot cooking z ones [H] are displayed

permanently.

By pressing the ON/OFF key “1”, the control unit m ay be

switched from „purely timer operation“ to cooking zone at any

time -with or without an activated Stand-Alone timer -. Sw itching

back to TC active mode with an active Stand-Alone timer the

timer is selected first (decimal dot on timer display flashes). After

a cooking z one is selected, the decimal dot disappears from the

timer display and a steady decimal dot on the cooking zone

display flashes on. W hen sw itching off the control unit by

ON/O FF key “1”, the Stand-Alone timer – if still in operation -is

also sw itched off.

Cooking zone specific timer programming

Switching on the TC enables timer setting for dedicated cooking

zones.

By actuating a cooking zone (cooking zone stage > 0) followed by

selecting the timer display (within 10 sec) a timer value may be

assigned to the cooking zone as a cut-off function. The LED

around the timer “9” indicates which cooking zone the timer had

been activated for.

As soon as the timer is selected the according LED is blinking

and the dot in the timer display is flashing permanently. In case of

a cooking zone is selected thereafter, the dot extinguishes and

the LED stops blinking.

When switching from one cooking zone to another, the timer

display indicates the current timer value of the respective cooking

zone. Timer settings of other cooking zones stay active.

Further setting is like with the stand-alone timer

In case of more than one active timer the display indicates the

lowest timer value (after 10s deselection time).

After expiring of the set time an acoustic signal is given and the

timer display flashes „00“. The related timer LED is blinking

synchronously. The programmed cooking zone is cut-off, a

permanent “0” is displayed and the cooking zone is selected

automatically. After 10 sec. (deselection time) a permanent “H“ is

displayed on a „hot“cooking zone. Otherwise, the symbol “0“ is

indicated.

The acoustic signal and the blinking of the cooking zone timer

Led is terminated

- after 2 min and/or

- by actuating any key.

Thereafter timer display stops extinguishes and the cooking zone

stays unselected.

Behaviour of the cooking zone specific timer is similar to the

stand alone timer.

In case of a timer is programmed for a cooking zone the

operating time limitation is dependent of the timer value and not

of the standard table value.

Pause mode

Activating the Pause function:

While at least one cooking zone is working, the cooking zones

can be switched off by touching the “P ause” key for more than 1

sec.

During the pause:

Timers already programmed are discontinued and remain in this

condition during the pause.

The pause mode can last for max. 10 min. If the status is not

cancelled within this period, the control unit switches off. The TC

unit can be sw itched off via the ON/OFF key at any time, a

possible pause mode is, thus, aborted.

Terminating the Pause mode:

Touching Pause key together with any other one key w ithin 10

sec causes a re-establishment of the state prevailing prior to the

pause mode. If no further key is touched within 10 sec, the TC

unit switches off.

Weissgauff HV 312 B [5/20] Activating the pause function

Содержание

Похожие устройства