Home
Главная
Gorenje
Утюг
SIH2600VC
Инструкция по эксплуатации Страница: 18

Gorenje SIH2600VC [18/30] Automatic anti calc system

DRY IRONING

Adjust The Variable Steam Control/Self Cleaning

Knob to minimum position "o" (picture 3).

Turn the Temperature Dial in clockwise direction;

select ‘●’ (1 dot), ‘●●’ (2 dots) or‘●●●’ (3 dots)

according to the recommendation of garment label.

STEAM IRONING

Make sure that there is enough water in the water

tank. Select the recommended ironing temperature.

Select the appropriate steam setting. Make sure that

the steam setting you select is suitable for the ironing

temperature selected :

● for moderate steam (picture 3)

● for maximum steam (picture 4 )

SPRAY FUNCTION

You can use the spray function to remove stubborn

creases at any temperature.

Make sure that there is enough water in the water

tank.

Press the spray button several times to moisten the

article to be ironed.(picture 5)

BURST OF STEAM (picture 6)

A powerful shot of concentrated steam helps remove

stubborn creases.The forward-directed concentrated

shot of steam enhances the distribution of steam into

every part of your garment.The shot-of-steam

function can only be used at temperature settings

between ●● and MAX. 1 Press and release the shot-

of-steam button .Betwen every shot wait for few

seconds.

VERTICAL SHOT OF STEAM

The shot-of-steam function can also be used when

you hold the iron in vertical position.This is useful for

removing creases from hanging clothes, curtains etc.

Hold the iron betwen 15 and 30 centimeters away

from the garment .(picture 7)

Never direct the steam towards people.

DRIP STOP

This iron is equipped with a drip-stop function: the iron

automatically stops producing steam when the

temperature is too low to prevent water from dripping

out of the soleplate.When this happens you may

hear a sound.

AUTOMATIC ANTI-CALC SYSTEM

The built-in anti-calc system reduces the build-up of

scale and guarantees a longer life for the iron.

ELECTRONIC SAFETY SHUT-OFF

FUNCTION

The electronic safety shut-off function automatically

switches off the iron if it has not been moved for a

while. The red auto-off pilot light starts blinking to

indicate that the iron has been switched off by the

safety shut-off function.To let the iron heat up again,

pick up the iron or move it slightly. The red auto-off

pilot light goes out. If the temperature of the soleplate

has dropped below the set ironing temperature, the

temperature pilot light goes on.

SELF CLEAN BUTTON

This function removes the scales and minerals built

up in the Steam Chamber. The iron will remain in the

best condition if this function is performed at least

once a month or more regularly depending on the

hardness of the water used.Turn the Temperature

Dial in clockwise direction to ‘●●●’ setting.

Pilot light goes off when the required temperature is

reached.Wait for one more cycle; pilot light glows and

goes off.Turn the Temperature Dial in anti-clockwise

direction to ‘Min’. Disconnect the iron from mains

supply outlet.Hold the iron horizontally over a sink.

Push and hold the SELF-CLEAN Knob (2) (D.Steam

and boiling hot water will drain from the holes on the

soleplate washing away the scales and minerals that

have built up inside the Steam Chamber.

Gently move the iron back and forth until the water

tank is empty. When Self-Cleaning is complete,

release the Steam Control/Self-Cleaning Knob.Rest

your steam iron back on its heel rest and allow to fully

cool down.

Wipe the soleplate with a cold damp cloth.

DRAINING THE WATER

Move the Steam Control/Self-Cleaning Knob to

position.Disconnect the iron from the mains supply

outlet.Press the Burst Of Steam button to release any

trapped water when the soleplate still hot.Press the

Spray Buttons to release any trapped water.Hold the

iron upside down and gently shake it to remove the

remaining water.

CLEANING THE IRON

Disconnect the iron from the mains supply outlet.

Use a damped cloth or non-scratching cleaner to

remove any deposits on the sole plate or the

cabinets.

Note:Never use sharp or rough objects to remove the

deposits on the sole plate.

Never use any abrasive, vinegar or descaling agents

to clean the iron.

WASTE DISPOSAL

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over to

the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and

human health, which could otherwise be caused by

inappropriate waste handling of this product. For

more detailed information about recycling of this

product, please contact your local city office, your

household

waste disposal service or the shop where you

purchased the product.

Gorenje SIH2600VC [18/30] Automatic anti calc system

Содержание

Похожие устройства