Maunfeld MVI45.3HZ.3BT-WH Белый [28/60] Starting up and appliance management

Display

Display Designation Description

0 Zero The heating zone is activated.

1…9 Booster level Selection of the cooking level.

U No pan detection No pan or inadequate pan.

A Heat accelerator Automatic cooking.

E Error message Electronic failure.

H Residual heat The heating zone is hot.

P Booster The boosted power is activated.

L Locking Control panel locking.

U Keep warm Maintain automatically of 70°C.

II Stop&Go The hob is in pause.

Ventilation

The cooling system is fully automatic. The cooling fan starts with a low speed when the calories

brought out by the electronic system reach a certain level. The ventilation starts his high speed

when the hob is intensively used. The cooling fan reduces his speed and stops automatically when

the electronic circuit is cooled enough.

STARTING-UP AND APPLIANCE MANAGEMENT

Before the first use

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent

which risks causing blue-tinted colour on the glass surface.

Induction principe

An induction coil is located under each heating zone. When it is engaged, it produces a variable

electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the

pan. The result is a heating-up of the pan located on the heating zone.

Of course the pan has to be adapted:

 All ferromagnetic pans are recommended (please verify it thanks a little magnet): cast iron

and steel pans, enamelled pans, stainless-steel pans with ferromagnetic bottoms…

 Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware…

The induction heating zone adapts automatically the size of the pan. With a too small diameter the

pan doesn’t work. This diameter is varying in function of the heating zone diameter.

If the pan is not adapted to the induction hob the display will show [ U ].