Metabo ASR 50 L SC 602034000 [19/136] Maintenance

Metabo ASR 50 L SC 602034000 [19/136] Maintenance
ENGLISH en
19
(replacement) filter. Allow the filter, container and
accessories to dry: otherwise dust may adhere to
damp components.
8.3 Special instructions for ASR 50 SC
Use as industrial vacuum cleaner (IS):
Turn switch (1) to the "RA" position.
Adjust the rotary switch (4) to a diameter of 35 mm.
If the volume flow falls below the set value
, the
volume
flow control display
lights up to indicate that the
container must be emptied, or that the paper filter
bag (7) /fleece filter bag (6) or the PE filter bag (7)
must be replaced
.
Use as a dust extractor (ENT):
The dust extractor must not be connected to more
than one dust source.
Turn switch (1) to the "RA" position.
Adjust the rotary switch (4) to the hose diameter of
the suction hose fitted. For more detailed informa-
tion, see section 7.4.
Connect the power tool (deactivated) to the plug
socket (3). See section 7.2.
8.4 Transport
In the case of the ASR 25 L SC / ASR 50 L SC, leave
the hose on the appliance to prevent dust acciden-
tally escaping.
In the case of ASR 50 M SC, seal the suction
opening (13) with a sealing plug (12) and join the
hose ends to prevent dust from escaping.
Wrap the suction hose about the vacuum cleaner.
Place the accessories in a suitable plastic bag and
seal the bag.
Suspend the mains connection lead on the
cable
holder
(11).
The upper part (8) must be securely sealed to the
container (10) - check that the snap locks (9) are
closed.
9.1 General Cleaning Instructions
Clean the container and accessories with water.
Wipe the upper part (8) with a damp cloth.
Caution! This appliance contains dust that is
harmful to health. Discharge and maintenance
operations (including disposal of the dust collection
containers) must only be carried out by qualified
specialists wearing appropriate protective clothing
and equipment.
Emptying the Container
Only permitted for dusts with
occupational exposure limits > 1 mg/m
3
.
- Unplug mains cable.
- ASR 50 M SC: remove suction hose, seal suction
opening (13) with sealing plug (12).
- Open the snap locks (9). Remove the upper part
(8) from the container (10).
- Tip out the container.
Dispose of the paper filter bag/fleece filter bag.
-Unplug mains cable.
-Pull on mask.
- ASR 50 M SC: remove suction hose, seal suction
opening (13) with sealing plug (12).
- Open the snap locks (9). Remove the upper part
(8) from the container (10).
- Carefully pull back and remove the paper filter bag
(7)/fleece filter bag (6) from the suction opening
(13). Seal the flange of the paper filter bag/fleece
filter bag by folding over the cover.
- Dispose of the vacuumed material in accordance
with legal regulations.
Disposing of the PE Filter Bag
-Insert mains plug.
- Switch on the vacuum cleaner and vibrate the
filters: turn the switch (1) to the "RA" position.
- Switch off the vacuum cleaner: turn the switch (1)
to the "0" position.
-Pull on mask.
- ASR 50 M SC: remove suction hose, seal suction
opening (13) with sealing plug (12).
- Open the snap locks (9). Remove the upper part
(8) from the container (10). Before setting down
the upper part, turn switch (1) to the "I" position so
that any falling dust is vacuumed.
- Carefully pull back the PE filter bag (5) from the
suction opening (13). Seal the flange of the PE
filter bag by folding over the cover.
- Dispose of the vacuumed material in accordance
with legal regulations.
9.2 Special cleaning instructions for
ASR 50 M SC
In the case of class M machines, the outside of the
machine should be cleaned (vacuumed and wiped
down), or treated with sealants before being removed
from the hazardous area. All machine parts must be
considered to be contaminated when removed from the
hazardous area: suitable measures must be taken to
prevent any dispersal of the dust. When carrying out
maintenance or repairs, it is essential to dispose of any
contaminated objects that cannot be adequately
cleaned. These objects must be disposed of using imper-
meable bags and in accordance with the applicable regu-
lations for removing such waste.
10.1 General Instructions
Before performing any maintenance, always
switch off the machine and remove the mains
plug.
Clean the appliance (see section9.).
For maintenance by the user, the vacuum cleaner
must be taken apart, cleaned and maintained, to the
extent possible, without endangering maintenance
staff or other people.
Preventive Measures
Appropriate preventive measures include: cleaning
the appliance before disassembly; providing local
filtered forced ventilation where the vacuum cleaner
is disassembled; cleaning of the maintenance area
9. Cleaning
10. Maintenance

Содержание

Похожие устройства

Скачать