Hitachi DV16VSSNA [17/41] Reassembly

-14-

8. Removal of the ratchet

Insert the tip of a flat-blade screwdriver between the Ratchet [17] <17> and Change Lever [22] <22>, and

then pry out the Change Lever [22] <22> to remove it. (Fig. 8) Remove the Tapping Screw (w/SP Washer)

D4 X 20 [16] <16> that mounts the Ratchet [17] <17> on the Inner Cover [21] <21>.

Place the end of the Inner Cover [21] <21> on the cylinder and push the end of the Bushing [18] <18> on

the rear of the ratchet with a hand press. The Ratchet [17] <17> then comes out together with the Change

Plate [20] <20>. (Fig. 9)

Perform reassembly by reversing the order of the disassembly procedure. However, special attention

should be given to the following items.

1. Internal wire arrangement

(1) Arrange the internal wires according to "7. Internal Wire Arrangement and Wiring Work."

(2) Be careful not to catch the internal wires when mounting the handle cover.

Change Lever [22] <22>

Change Plate [20] <20>

Bushing [18] <18>

Fig. 9

Inner Cover [21] <21>

Change Plate [20] <20>

Bushing [18] <18>

Ratchet [17] <17>

Ø67 to Ø80

Push

Reassembl

Fig. 8

Insert the tip of the flat-blade

screwdriver here.

Cylinder