HansGrohe Talis S 32841000 [4/40] Assembly see page 31
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

HansGrohe Talis S 32841000 [4/40] Assembly see page 31

HansGrohe Talis S 32841000 [4/40] Assembly see page 31
Assembly see page 31
Test certificate (see page 40)
Spare parts (see page 37)
XXX = Colors
000 = chrome plated
800 = stainless steel optic
Maintenance (see page 36)
The check valves must be checked regularly
according to DIN EN 1717 in accordance
with national or regional regulations (at least
once a year).
Cleaning (see page 36 and en-
closed brochure)
If the waterflow drops, clean the filter
located between hose and handspray.
Operation (see page 35)
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Flow diagram
(see page 34)
Handspray flow rate
Rate of flow Normal spray
Dimensions (see page 34)
Adjustment (see page 33)
To adjust the hot water limiter. Using a hot
water limiter in combination with a continu-
ous flow water heater is not recommended.
Do not use silicone containing acetic acid!
Symbol description
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pres-
sures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be oberserved.
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C / 4 min
• Safety against backflow
• The product is exclusively designed for drinking water!
English
4

Содержание

Похожие устройства

Скачать