Home
Главная
Husqvarna
Электрическая Цепная Пила
420EL 9672057-16
Инструкция по эксплуатации Страница: 105

Husqvarna 420EL 9672057-16 [105/606] Before using a new chain saw

GENERAL SAFETY PRECAUTIONS

English – 105

Electrical safety

• It is recommended that you use a Residual Current

Device (RCD) with a tripping current of not more than

30mA. Even with a RCD installed 100% safety cannot

be guaranteed and safe working practice must be

followed at all times. Check your RCD every time you

use it.

• Before use, examine the cable for signs of damage or

ageing. If the cable is found to be defective, take the

product to an Authorized Service Center and have the

cable replaced.

• Do not use the product if the electric cables are

damaged or worn.

• Immediately disconnect from the mains electricity

supply if the cable is cut, or the insulation is damaged.

Do not touch the electric cable until the electrical

supply has been disconnected. Do not repair a cut or

damaged cable. Take the product to an Authorised

Service Centre and have the cable replaced with a

genuine spare cable.

• Always make sure that the cable/extension cord is

kept behind the user, ensuring that it does not create

a source of danger for the user or for other persons,

and check that it cannot be damaged (by heat, sharp

objects, sharp edges, oil, etc);

• Position the cable so that it will not be caught on

branches and the like, during cutting.

• Always switch off at the mains before disconnecting

any plug, cable connector or extension cable.

• Switch off, remove plug from the mains and examine

electric cable for damage or ageing before winding

cable for storage. Do not repair a damaged cable.

Take the product to an Authorised Service Centre and

have the cable replaced.

• Remove the plug from the mains before leaving the

product unattended for any period.

• Always wind cable carefully, avoiding kinking.

• Use only on AC mains voltage shown on the product

rating label.

• The chainsaw is double insulated to EN60745-1 & 2-

13.

• Make sure your extension cord is in good

condition. Inspect extension cord before use and

replace if damaged. Do not use a damaged cord.

Cord insulation must be intact with no cracks or

deterioration. Plug connectors must be undamaged.

Damaged extension cords increase the risk of electric

shock.

• Residual Current Device (RCD) protection should

be provided on circuit or outlet to be used.

Receptacles are available having built-in RCD

protection and may be used for this measure of safety.

Inspect chain saw cords periodically and if damaged,

have repaired by an authorized service dealer.

Cables

• Extension cables are available from your local

Approved Service Centre.

• Only use approved extension cables.

• Extension cables and leads should only be used if

they are designed for outdoor use and comply with

H07 RN-F or IEC 60245 designation 66.

Before using a new chain saw

• Please read this manual carefully.

• Fill with chain oil. See instructions under the heading

Filling with chain oil.

• Do not use the chain saw until sufﬁcient chain oil has

reached the chain. See instructions under the

heading Lubricating cutting equipment.

• Check that the cutting equipment is correctly ﬁtted

and adjusted. See instructions under the heading

Assembly.

• Long-term exposure to noise can result in permanent

hearing impairment. So always use approved hearing

protection.

• This saw is intended for use between the

temperatures of -20°C (-4°F) and +40°C (104°F).

WARNING! Under no circumstances may

the design of the machine be modiﬁed

without the permission of the

manufacturer. Always use original

accessories. Non-authorized

modiﬁcations and/or accessories can

result in serious personal injury or the

death of the operator or others.

WARNING! A chain saw is a dangerous

tool if used carelessly or incorrectly and

can cause serious, even fatal injuries. It

is very important that you read and

understand the contents of this

operator’s manual.

WARNING! This machine produces an

electromagnetic ﬁeld during operation.

This ﬁeld may under some

circumstances interfere with active or

passive medical implants. To reduce the

risk of serious or fatal injury, we

recommend persons with medical

implants to consult their physician and

the medical implant manufacturer before

operating this machine.

WARNING! Long term inhalation of chain

oil mist and dust from sawdust can

represent a health risk.

Содержание

Похожие устройства

GENERAL SAFETY PRECAUTIONS Electrical safety Cables It Is recommended that you use a Residual Current Device RCD with a tripping current of not more than 30mA Even with a RCD installed 100 safety cannot be guaranteed and safe working practice must be followed at all times Check your RCD every time you use it Extension cables are available from your local Approved Service Centre Before use examine the cable for signs of damage or ageing If the cable is found to be defective take the product to an Authorized Service Center and have the cable replaced Only use approved extension cables Extension cables and leads should only be used if they are designed for outdoor use and comply with H07 RN F or IEC 60245 designation 66 Before using a new chain saw Please read this manual carefully Do not use the product if the electric cables are damaged or worn Fill with chain oil See instructions under the heading Filling with chain oil Immediately disconnect from the mains electricity supply if the cable is cut or the insulation is damaged Do not touch the electric cable until the electrical supply has been disconnected Do not repair a cut or damaged cable Take the product to an Authorised Service Centre and have the cable replaced with a genuine spare cable Do not use the chain saw until sufficient chain oil has reached the chain See instructions under the heading Lubricating cutting equipment Always make sure that the cable extension cord is kept behind the user ensuring that it does not create a source of danger for the user or for other persons and check that it cannot be damaged by heat sharp objects sharp edges oil etc Position the cable so that it will not be caught on branches and the like during cutting Always switch off at the mains before disconnecting any plug cable connector or extension cable Switch off remove plug from the mains and examine electric cable for damage or ageing before winding cable for storage Do not repair a damaged cable Take the product to an Authorised Service Centre and have the cable replaced Remove the plug from the mains before leaving the product unattended for any period Always wind cable carefully avoiding kinking Use only on AC mains voltage shown on the product rating label Check that the cutting equipment is correctly fitted and adjusted See instructions under the heading Assembly Long term exposure to noise can result in permanent hearing impairment So always use approved hearing protection This saw is intended for use between the temperatures of 20 C 4 F and 40 C 104 F WARNING A chain saw Is a dangerous tool If used carelessly or Incorrectly and can cause serious even fatal Injuries It Is very Important that you read and understand the contents of this operator s manual The chainsaw is double insulated to EN60745 1 213 Make sure your extension cord Is in good condition Inspect extension cord before use and replace if damaged Do not use a damaged cord Cord insulation must be intact with no cracks or deterioration Plug connectors must be undamaged Damaged extension cords increase the risk of electric shock Residual Current Device RCD protection should be provided on circuit or outlet to be used Receptacles are available having built in RCD protection and may be used for this measure of safety Inspect chain saw cords periodically and if damaged have repaired by an authorized service dealer WARNING Under no circumstances may the design of the machine be modified without the permission of the manufacturer Always use original accessories Non authorlzed modifications and or accessories can result In serious personal Injury or the death of the operator or others WARNINGIThls machine produces an electromagnetic field during operation This field may under some circumstances Interfere with active or passive medical Implants To reduce the risk of serious or fatal Injury we recommend persons with medical Implants to consult their physician and the medical Implant manufacturer before operating this machine Zk WARNING Long term Inhalation of chain J oil mist and dust from sawdust can represent a health risk English 105

Скачать

Случайные обсуждения

Ответы 0

День добрый. Подскажите пожалуйста какую правильно подобрать заточку для данной пилы.

2 года назад