Clatronic HTD 3332 [31/48] Cleaning and care

4. Insert the plug into a duly installed 230 V/50 Hz protective contact socket.

5. Shift the switch on the handle to one of the desired heat/blowing levels:

Level 0: off

Level 1: medium airow and medium temperature

Level 2: strong airow and high temperature

COOL SHOT (Cold Air)

COOL With this switch you can stop the heating process. Hold the

button down in this position according to the desired interval

length. When the button is released it returned automatically

to the initial position.

Switch-off

• After use shift the switch to position „0“ and pull out the plug. Leave the device to cool

before putting it away! To this purpose place the device on one side of the housing or

hang it up by the suspension lug.

Cleaning and care

• Before cleaning remove the mains lead from the socket.

• Clean the housing with a soft, dry cloth without additives.

WARNING: The device must never be immersed in water!

Mains Cable

• The mains cable should only be wound up loosely.

• Never tie the cable tightly round the device, as over time this may result in the cable

breaking.

• Check the mains cable regularly for damage.

Air Intake Grill

• Please clean the grill on the air intake side of the hairdryer regularly in order to avoid

excessive temperatures as a result of heat accumulation.

• Remove any dirt that is present. If necessary, a ne brush can be used.

05-HT 3332.indd 31 05.10.2009 14:40:32 Uhr