Clatronic EKI 3157 [57/100] Cleaning

Cleaning

Always pull out the plug from the mains socket before cleaning and wait until the unit has

cooled down.

Do not use any wire brush or other abrasive objects.

Do not use any acidic or abrasive detergents.

Under no circumstances should the device be immersed in water for cleaning.

Ceramic Hob

• Clean the surface from food remains when it's still warm using a moist cloth or tissue.

• Wash the hob using a soft sponge and some water, then wipe dry with a soft cloth.

• Cleaning agent for glass-ceramics surfaces: In case of stubborn, baked-in remains,

use suitable cleaning products available at special departments of department stores.

Housing

• Clean the housing after use using a slightly moist cloth.

• Make sure that no fluid matter gets into any of the openings of the housing. This might

damage the device or result in an electric shock.

Troubleshooting

• Device does not function, no indication on the display.

Remedy: Check the mains connection.

• There is a sound after I have selected a cooking function and switched the device

on.

Possible cause: You put no or an unsuitable pot on the hob.

Remedy: Put a pot on the hob that is suitable for induction hobs.

• The hob suddenly switches off during operation.

Possible cause: The overheating protection (cutout switch) has been activated.

Remedy: Pull the plug and let the device cool down for about 20 min.

Then start operating the device again.

Further cause: The ventilation slots are obstructed.

Remedy: Free the ventilation slots from any obstructions.

• When keeping food warm the pot is not maintaining the temperature.

Possible cause: The pot’s base is not level or bended (convex/concave).

Remedy: Put a suitable pot on the hob.

NOTE: For reasons of safety, the device automatically switches to the standby

mode after a few seconds.

ProfiC_BDA_IKP_3157_td.qxd 21.11.2007 15:52 Uhr Seite 57