Home
Главная
GRAPHITE
Угловая Шлифовальная Машина
59G097
Инструкция по эксплуатации Страница: 17

GRAPHITE 59G097 [17/184] Angle grinder 59g097

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

ANGLE GRINDER

59G097

NOTE: BEFORE THE POWER TOOL IS USED FOR THE FIRST TIME, READ THIS INSTRUCTION MANUAL AND

KEEP IT FOR FUTURE REFERENCE.

DETAILED SAFETY REGULATIONS

ANGLE GRINDER, SAFETY WARNINGS

Safety guidelines for grinding, sanding with sandpaper, working with wire brushes and cutting

using the grinding wheel.

• This power tool can be used as a regular grinder, sander for sanding with sandpaper, grinder for

grinding with wire brushes and for cutting with a cut-o wheel. Observe all safety guidelines,

instructions, descriptions and data provided with the power tool. Failure to observe the following

recommendations may cause danger of electric shock, re and/or serious injuries.

• This power tool cannot be used for polishing. When the power tool is used for other works than it is

designed for, it may contribute to hazards and injuries.

• Do not use equipment, which is not designed and recommended by the manufacturer specically

for this device. The fact that it can be fastened to the power tool, does not guarantee safe operation.

• The permissible rotational speed of a working tool used cannot be lower than the maximum

rotational speed given on the power tool. A working tool rotating faster than the permissible speed may

break and its parts may chip o.

• The outside diameter and thickness of a working tool must correspond to dimensions of the power

tool. A working tool of incorrect dimensions may not provide sucient control and covering of the power

tool.

• Working tools with threaded inserts must perfectly t the thread in the spindle. In case of working

tools that are fastened using a ange, the hole diameter of a working tool must t the ange

diameter. Working tools, which cannot be precisely seated in the power tool, rotate unevenly, vibrate heavily

and may result in loss of control over the power tool.

• Under no circumstances, should damaged working tools be used. Before the power tool is used,

accessories such as cut-o wheels should be checked for chips and cracks, grinding wheels should

be checked for cracks, abrasion or heavy wear, while wire brushes for loose or broken wires. When

the power tool or a working tool is dropped, it must be checked for damage or another, undamaged

tool should be used. If a working tool is checked and fastened, the power tool should be switched

on for a minute at the highest speed, paying attention so that the operator and bystanders are

beyond the zone of the rotating tool. Damaged working tools often break in this test period.

• Always wear personal protective equipment. Depending on a type of work, a full face mask, eye

protection or safety glasses should be worn. A dust mask, ear protection, protective gloves or a

special apron protecting against small particles of abrasive material and workpiece should be

worn, if needed. Protect your eyes against airborne foreign bodies occurring during operation. A dust mask

and protective mask for the respiratory system must lter dust occurring during work. The inuence of noise for

a longer period of time may lead to deterioration of the hearing.

• Always make sure bystanders are in a safe distance from the power tool reach zone. All people

staying in the vicinity of the operating power tool must use personal protective equipment. Chips of

a workpiece or broken working tools may chip o and cause injuries also beyond the direct reach zone.

• When works are performed, during which the power tool may encounter hidden electric conductors

or own power cord, the power tool should be held by the isolated surfaces of the handle. A contact

with the power mains network may transfer voltage onto metal parts of the power tool, which may result in

electric shock.

• The power cord must be kept away from the rotating working tools. When the control over the tool is

lost, the power cord may be cut or caught, and your hand or the entire arm may get into the rotating working

tool.

• Do not put the power tool aside, before the working tool comes to complete stop. The rotating

GRAPHITE 59G097 [17/184] Angle grinder 59g097

Содержание

Похожие устройства