MONTOLIT TORNADO 970T [17/28] English

ENGLISH

ELECTRIC POWER SUPPLY

WARNING!

• Check the integrity of the cable and breakers.

• Respect the voltage (V) and frequency (Hz) indicated on the machine.

• Carry out the electrical connection with ground

(yellow/green) to an IP67 outlet (2P+T) protected

by an I∆N 0.03A dierential breaker.

• Periodically check the operation of the dierential

breaker.

• For an extension, use only the IP67 (2P+T) socket

and plug and a 3 x 2.5mm2 cable of the H 07 RN-F

type (max length 5 m).

• Check the placement of the power cable: it must not obstruct movement, and should not be

subject to shock or damage.

• Remove the electrical connection during each routi-

ne or extraordinary maintenance operation, for the

loading of coolant (water), or for the substitution of

the diamond disk.

• Models equipped with a thermal protection switch and minimum voltage coil.

• Avoid forcing the motor during processing. The machine has a security system that protects

it from engine overheating; consequently, if the mo-

tor is arrested without apparent reason, it is neces-

sary to wait a few minutes so that the safety circuit

is disactivated, as the machine has almost certainly

been subjected to excessive force and the cutting

advancement speed must therefore be moderated,

then press the overload-protector switch to restart

the saw (see the side picture).

• In the case of malfunction regarding a breaker, cable, engine, or pump, consult an expert or

our Technical Oce.

ADJUSTING LASER BEAM

1 2 3