Ada Cosmo 100 [16/66] Cosmo 100 1

COSMO 100

Indirect horizontal distance

Press button (2). Symbol of angle measurement will be displayed on the screen. Press button (1) to measure inclination

and distance. Horizontal distance will be displayed in the summary line. The display must be upward when measuring.

The instrument stops measuring if it deviates from this position more than 10 degrees.

Marking function

Set distance a and then use it as a mark of the definite measurement. Add the distances: press the button (2) two times

until the symbol of the fixed distance is showed on the display. Distance volume is blinking on the display.

It is possible to set volumes for required marking of the distance with the help of buttons (3) and (7). press button (1) to

confirm the operation. Press button (1) to make measurement based on the mark.

Distance volume is displayed in the summary line between the marking dot and the instrument (see Setting of the

reference mark).

The distance is decreased if you slowly move the instrument along the marking line. The instrument starts to give

sound alarm at the distance less 0.1m from the following marking point.