AEG KS 66-2 [16/97] English

14

GB

WARNING! Read all safety warnings and all

instructions.

Failure to follow the warnings and instructions may result in electric

shock, re and/or serious injury.

Save all warnings and instructions for future reference.

CIRCULAR SAW SAFTEY WARNINGS

protect you from the blade below the workpiece.

Adjust the cutting depth to the thickness of the workpiece.

Less than a full tooth of the blade teeth should be visible below the

workpiece.

Never hold piece being cut in your hands or across your leg.

Secure the workpiece to a stable platform. It is important

to support the work properly to minimize body exposure, blade

binding, or loss of control.

Hold the power tool by insulated gripping surfaces only,

when performing an operation where the cutting tool may

Always use blades with correct size and shape (diamond versus

round) of arbour holes.Blades that do not match the mounting

hardware of the saw will run eccentrically, causing loss of control.

Never use damaged or incorrect blade washers or bolt. The

blade washers and bolt were specially designed for your

saw, for optimum performance and safety of operation.

Kickback causes and related warnings:– kickback is a sudden

reaction to a pinched, bound or misaligned saw blade, causing an

uncontrolled saw to lift up and out of the workpiece toward the

operator;– when the blade is pinched or bound tightly by the kerf

or incorrect operating procedures or conditions and can

be avoided by taking proper precautions as given below.

Maintain a rm grip with both hands on the saw and posi-

tion your arms to resist kickback forces. Position your body

to either side of the blade, but not in line with the blade.

TECHNICAL DATA

Circular saw

KS 66-2

Production code 4466 76 01 ...

... 000001-999999

Weight according EPTA-Procedure 01/2003 4,8 kg

Noise/Vibration InformationMeasured values determined according to EN 60745.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K=3dB(A))

Sound power level (K=3dB(A))

Wear ear protectors!

92,5 dB(A)

103,5 dB(A)

Total vibration values (vector sum in the three axes) determined according to EN 60745.

Sawing of wood Vibration emission value a

h,W

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745

and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for dierent applications,

with dierent accessories or poorly maintained, the vibration emission may dier. This may signicantly increase the exposure level over

the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is run-

ning but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories,

keep the hands warm, organisation of work patterns.