Trotec Speedy 300 flexx [18/54] Location

8017 Trotec Speedy 300 fiber

BEFORE OPERATION

28/07/2015 Trotec Produktions- und Vertriebs GmbH_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support 18 / 54

tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto: techsupport@troteclaser.com

3.3 Location

Before you install the laser system, you should select an appropriate location. Follow the

guidelines shown below:

Avoid locations where the system is exposed to high temperatures, dust and

high humidity (The humidity must not exceed 70% and the temperature must

not be close to the dew point).

Avoid locations, where the system is exposed to mechanical shocks

Fuse protection:

Do not connect other devices via the laser fuse, as the laser system requires

the full amperage.

Avoid locations with poor air circulation.

Select a location, whose room temperature is between 15 °C and 25 °C (59° –

77° F). Avoid higher ambient temperatures and strong exposure of the

machine to the sun. Use blinds, if required.

Select a location close to ventilation (if available).

Select a location that is not more than 2.50 m away from your computer

(max. cable length to avoid disturbing interferences).

Try to place a working table or a place to put things next to it. This shall avoid,

that the machine is misused as a table.