Delonghi TGX 664 GHI [10/92] Lighting gas burners fitted with safety valve device

Fig. 2.2

LIGHTING GAS BURNERS

FITTED WITH SAFETY VALVE

DEVICE

To ignite the burner, the following

instructions are to be followed:

1) Press in the corresponding knob and

turn counter-clockwise (Fig. 2.2) to

the full flame position marked by the

) symbol (Fig. 2.1) and hold the

knob in until the flame has been lit.

In the case of a mains failure light the

burner with a match or lighted taper.

2) Wait for about ten seconds after the

gas burner has been lit before let-

ting go of the knob (valve activation

delay);

3) Adjust the gas valve to the desired

position.

If the burner flame should go out for

some reason, the safety valve will

automatically stop the gas flow.

To re-light the burner, return the knob to

the closed ● position, wait for at least

1 minute and then repeat the lighting

procedure.

If your local gas supply makes it

difficult to light the burner with the

knob set to maximum, set the knob to

minimum and repeat the operation.

In the case of a mains failure light the

burner with a match or lighted taper.

Caution!

The cooking hob becomes very hot

during operation.

Keep children well out of reach.