Scarlett SC-149White [3/9] Before the first using

Scarlett SC-149White [3/9] Before the first using
3
· When the circuit breaker activates, do not switch on.
· Never try to replace the parts and repair the unit by yourself.
BEFORE THE FIRST USING
· Check that voltage indicated on the rating label corresponds the mains voltage in your
home.
· Wash all parts (except body) in warm soapy water.
· Before plugging in, ensure the On/Off switch is  position.
INSTRUCTION FOR USING
ASSEMBLING
· Place the head tightly onto the head inlet.
Holding the head with one hand, place the
locking knob into the hole on the side of the
motor housing and tighten it clockwise (fig.1).
· Place the snake into the head, long end first,
and turn to feed the screw slightly until it is
set into the motor housing (fig.2).
· Place the cutting blade onto the snake shaft
with the blade facing the front as illustrated
(fig.3). If it is not fitted properly, meat will not
be ground.
· Place the desired cutting plate next to the
cutting blade, fitting protrusions in the slot
(fig.4).
· Screw the fixing ring tight (fig.5). Do not over
tighten.
· Place the hopper plate on the head and fix it
into position.
· Locate the unit on a firm place.
· The air passage at the bottom and the side
of the motor housing should be kept free and
not blocked.
MINCING MEAT
· Cut all foods into pieces so that they fit easily
into the hopper opening.
· Plug the unit on and switch it on.
· Feed foods into the hopper plate. Use for it only the food pusher (fig.6).
· After use switch the unit off and unplug it from the power supply.
REVERSE FUNCTION
· In case of jamming switch off the appliance by pressing the On/Off switch to 
position and switch reverse knob.
· Snake will be rotating in the opposite direction, and the head will get empty.
· If it doesnt work, switch off the unit and clean it.
Скачать