AEG BHG 750 W [14/52] Power supply

AEG BHG 750 W [14/52] Power supply
14
Installation - for contractors
9.2 Wall mounting
Note
Observe the dimensions and minimum clearances
in chapter "Specication".
» Drill the holes and insert rawl plugs.
26_07_80_0058
1
456
32
1 Retainer screw
2 Wall sleeve
3 Lock screw
4 Angle shim (BHG 750-1000W) | Washer (BHG 750
C)
5 Retainer
6 Cap
» BHG 750-1000 W: Use screws to secure the wall
sleeves and the shims.
» BHG 750 C: Use screws to secure the wall sleeves
and the washers.
» Secure the retainers to the rungs. Do not yet tighten
the retainers.
26_07_80_0056
» Fit the wall mounting bracket. For this, observe the
slot position. The slot must point respectively up or
down.
D0000040882
» Assemble the appliance and wall mounting bracket.
» Insert and tighten the screws to secure the
appliance.
9.3 Fitting the bathrobe hooks
26_07_80_0055
1 32
1 Bathrobe hook
2 Washer
3 Bathrobe hook backplate
» Fit the bathrobe hooks as shown.
10. Power supply
WARNING Electrocution
In wet rooms such as shower rooms and kitchens,
install the ush box at least 25 cm above the oor.
WARNING Electrocution
Never operate the appliance with an extension cable
or a multiple socket.
!
Material losses
Ensure the appliance can be separated from the
power supply by an isolator that disconnects all
poles with at least 3 mm contact separation. For this,
use contactors, mains isolators, fuses, etc. Installa-
tion with a permanent power cable is not permitted.
!
Material losses
Observe the type plate. The specied voltage must
match the mains voltage.

Содержание

Скачать