![Airwell AQL 100 — guidelines for Transport, Handling, and Storage of Equipment [18/63]](/img/pdf.png)
Airwell AQL 100 — guidelines for Transport, Handling, and Storage of Equipment [18/63]
![Airwell AQL 120 [18/63] Transportortion handling and stockage](/views2/1409371/page18/bg12.png)
Page 17
English
Transportortion, Handling and Stockage
While lifting and handling the unit, pay at-
tention. Otherwise, you might damage the
finned pack of the batteries arranged on
both sides of the unit. The sides of the unit
shall be protected by cardboard or ply-
wood sheets.
Until the unit is ready for operation, do not
remove the plastic envelope and the battery
protections which are intended to prevent
dirt, dust and any foreign matter from pene-
trating into the unit through the inlets of fans
or from damaging the external surfaces.
3.3 Storage
If the unit is to be stored before the installation for
some time, take at least the following precautions to
prevent damage, corrosion and/or deterioration:
h
Make sure all openings, such as for example wa-
ter connections, are well plugged and sealed.
h
Never store the units in a room where temperature
is above 42 °C (R407C units) or where the units
are directly exposed to the sunlight.
h
It is recommended to leave the finned batteries
covered to protect them against any risk of corro-
sion, especially if building works are still in
progress.
h
Store the units in areas where minimum activity is
likely to take place in order to avoid any risk of ac-
cidental damage.
h
Never use steam to clean the unit.
h
Remove all the keys required to have access to the
control panel and give them to the person in
charge of the field.
It is also recommended to provide for visual inspec-
tions at regular intervals.
Содержание
- Installation and maintenance manual p.1
- Aql aqh 20 130 p.1
- English p.1
- Air cooled water chillers and air to water reverse cycle heat pumps p.1
- Iom aqlh n gb p.1
- English p.2
- Preface p.4
- Manufacturer information p.4
- Warranty p.4
- Safety p.4
- English p.4
- Manufacturer information p.5
- Emergency stop p.5
- Manufacturer information p.6
- Safety labels p.6
- English p.6
- Material safety data p.7
- Manufacturer information p.7
- Page 6 p.7
- Refrigerant data p.7
- English p.8
- Page 7 p.8
- Manufacturer information p.8
- Page 8 p.9
- Manufacturer information p.9
- Lubricating oil data p.9
- Product description p.10
- General information p.10
- English p.10
- Accessories p.11
- Product description p.11
- Product description p.12
- English p.12
- Units aql 20 80 p.13
- Refrigeration circuits p.13
- Product description p.13
- Page 12 p.13
- Units aql 90 130 p.14
- Product description p.14
- Page 13 p.14
- English p.14
- Units aqh 20 80 p.15
- Product description p.15
- Page 14 p.15
- Units aqh 90 130 p.16
- Product description p.16
- Page 15 p.16
- English p.16
- Handling p.17
- Transportortion handling and stockage p.17
- Transportation handling and storage p.17
- Inspection p.17
- Transportortion handling and stockage p.18
- Storage p.18
- English p.18
- Installation p.19
- Installation site p.19
- Defrost water drainage only for aqh units p.19
- Installation of spring shock absorbers p.20
- Installation p.20
- English p.20
- Installation p.21
- External water circuit p.21
- Connect the water lines of the plants with the at tachments of the unit whose diameters and positions are shown by chapter 9 p.22
- Before filling the installation remove any impurity such as sand crushed stones and welding scales coating drops and any other material which might damage the evaporator p.22
- When two or several units are connected in paral lel to balance the load losses of the various cir cuits it is recommended to execute a reverse re turn connection see the diagram below p.22
- Water connections p.22
- Version with a pump p.22
- The water used to fill the circuit shall be treated in such as way that the ph will have the correct value p.22
- The attachments at the water inlet and out let shall be connected in compliance with the instructions which can be found on the labels in the proximity of the attachments p.22
- Page 21 p.22
- Legend s on off valves vg balancing valves p.22
- It is advisable to flush with disposable water by passing the exchanger to avoid clogging p.22
- Installation p.22
- English p.22
- Supplied material p.23
- Shock absorbers p.23
- Operating limits p.23
- Installation p.23
- Features p.23
- Accumulation tank kit p.23
- Installation p.24
- English p.24
- Storage kit 224 112 l for aql 40 50 aqh 40 dimensional data p.25
- Storage kit 112 l for aql aqh 20 35 dimensional data p.25
- Page 24 p.25
- Installation p.25
- Storage kit 294 147 l for aql aqh 90 100 aqh 90 dimensional data p.26
- Storage kit 294 147 l for aql 60 80 aqh 50 80 dimensional data p.26
- Page 25 p.26
- Installation p.26
- English p.26
- Storage kit 294 147 l for aql aqh 110 130 aqh 100 130 dimensional data p.27
- Page 26 p.27
- Installation p.27
- Electrical connections p.28
- Electrical supply features p.28
- Installation p.28
- English p.28
- Electronic board p.29
- Pump control relay p.29
- Page 28 p.29
- Installation p.29
- Electrical connections of the aql aqh 20 35 units with neutral p.29
- Antifreeze resistance control relay p.29
- Pump control relay p.30
- Page 29 p.30
- Installation p.30
- English p.30
- Electronic board p.30
- Electrical connections of the aql aqh 40 80 units with neutral p.30
- Antifreeze resistance control relay p.30
- Antifreeze resistance control relay p.31
- Pump control relay p.31
- Page 30 p.31
- Installation p.31
- Electronic board p.31
- Electrical connections of the aql aqh 40 80 units without neutral p.31
- Mors 103 hydrokit mors 8 hydrokit p.32
- Linea potenza 400 3 n 50 pe p.32
- Vac disponib per accessori max 40va p.32
- Interruttore remoto di marcia arresto p.32
- Unita in allarme n o spst max 2 a 250vac p.32
- Interblocco esterno consenso pompa esterna p.32
- Sezionatore p.32
- Installation p.32
- English p.32
- Selezione riscald raffredd p.32
- Electronic board p.32
- Selezione modalita notte o doppio setopoint p.32
- Electrical connections of the aql aqh 90 130 units without neutral p.32
- Scheda elettronica p.32
- Comune p.32
- Rele comando resistenza antigelo p.32
- Caldo freddo p.32
- Rele comando pompa p.32
- Antifreeze resistance control relay p.32
- Pump control relay p.32
- Parzializzazione forzata della capacita frigorifera p.32
- Page 31 p.32
- On off p.32
- Morsettiera bordo macchina collegamenti utente p.32
- Mors 14 hydrokit mors 8 hydrokit p.32
- Preliminary checks p.33
- Commissioning p.33
- Starting p.33
- Performance check p.34
- English p.34
- Delivery to the user p.34
- Commissioning p.34
- Electronic card control p.35
- Aql aqh control p.35
- English p.36
- Dip switches p.36
- Aql aqh control errata corrige p.36
- Aql aqh control p.37
- Sens menu sensors reading p.38
- English p.38
- Aql aqh control p.38
- Alar and log menus p.38
- Daily maintenance p.39
- Maintenance p.39
- General information p.39
- Refrigerant charge p.40
- Refrigerant air exchangers p.40
- Maintenance p.40
- Fans of the refrigerant air exchangers p.40
- English p.40
- Dryer filter p.40
- Compressors p.40
- Thermal expansion valves p.41
- Sight glass p.41
- Refrigerant circulating fluid exchanger p.41
- Maintenance p.41
- Probable cause remedy p.42
- Page 41 p.42
- English p.42
- Trouble shooting p.42
- The following table will give a detailed list of unit faults and remedies contact an authorised itelco clima service centre for any other problem which can not be clearly ascribed to one of the cases listed in the table and or for any other need for technical assistance p.42
- Trouble shooting p.43
- Probable cause remedy p.43
- Page 42 p.43
- Technical data p.45
- Page 44 p.45
- Aql aqh 90 130 standard water pump available head p.45
- Aql aqh 20 25 30 35 refrigerant water heat exchangers pressure drops p.45
- 100 90 p.45
- Technical data p.46
- Page 45 p.46
- English p.46
- Aql aqh 90 130 refrigerant water heat exchangers pressure drops p.46
- Aql aqh 40 80 refrigerant water heat exchangers pressure drops p.46
- Air temperature c p.47
- Working range in cooling mode working range in heating mode p.47
- Working range p.47
- Units aql aqh 20 130 r407c p.47
- Technical data technical data technical data p.47
- Page 46 p.47
- Leavig water temperature c leavig water temperature c p.47
- Page 47 p.48
- Noise levels p.48
- Models 20 25 30 35 40 50 60 70 80 90 100 110 120 130 p.48
- Model octave band central frequency hz p.48
- Italiano p.48
- High pressure transducer yes low pressure transducer yes p.48
- High pressure switch yes p.48
- Fans heat protection yes p.48
- English p.48
- Compressors heat protection yes p.48
- Water flow switch yes p.48
- Technical data p.48
- Sound pressure levels lp a db a p.48
- Sound pressure levels at 1 m distance according to iso 3744 sound levels applicable to all high discharge head units 90 130 p.48
- Sound power levels lw a db a p.48
- Safety devices p.48
- Units aql aqh 20 80 p.49
- Technical data technical data technical data p.49
- Page 48 p.49
- General characteristics p.49
- Units aql aqh 90 130 p.50
- Technical data technical data technical data p.50
- Page 49 p.50
- English p.50
- Page 50 p.51
- Electrical characteristics p.51
- Units aql aqh 20 80 p.51
- Technical data technical data technical data p.51
- Units aql aqh 90 130 p.52
- Technical data technical data technical data p.52
- Page 51 p.52
- English p.52
- Units aql aqh 20 130 p.53
- Technical data p.53
- Page 52 p.53
- Dimensional data p.53
- Units aql aqh 20 25 30 35 p.54
- Technical data p.54
- Page 53 p.54
- English p.54
- Technical data p.55
- Page 54 p.55
- Units aql 40 50 and aqh 40 p.55
- Units aql 60 70 80 and aqh 50 60 70 80 p.56
- Technical data p.56
- Page 55 p.56
- English p.56
- Units aql aqh 90 100 p.57
- Top view p.57
- Technical data p.57
- Page 56 p.57
- Front view side view p.57
- Units aql aqh 110 120 130 p.58
- Top view p.58
- Technical data p.58
- Page 57 p.58
- Front view side view p.58
- English p.58
- Technical data p.59
- Space requirements p.59
- The tables here below will list the wiring diagrams relevant for pack and non pack units with and without a neutral p.61
- The table here below will list the spare parts which are recommended for each unit for two years p.61
- The table here below will list the oils recommended for each model p.61
- Spare parts errata corrige p.61
- Spare parts p.61
- Relevant wiring diagrams p.61
- Recommended spare parts p.61
- Page 60 p.61
- Oils recommended for compressors p.61
- General information p.62
- English p.62
- Dismantling demolition and scrapping p.62
- Wesper s a s p.63
Похожие устройства
-
Airwell AQL 130Инструкция по монтажу -
Airwell AQL 130Инструкция по эксплуатации -
Airwell AQL 120Инструкция по монтажу
-
Airwell AQL 120Инструкция по эксплуатации
-
Airwell AQL 110Инструкция по монтажу
-
Airwell AQL 110Инструкция по эксплуатации
-
Airwell AQL 100Инструкция по монтажу
-
Airwell AQL 90Инструкция по монтажу
-
Airwell AQL 90Инструкция по эксплуатации
-
Airwell AQL 80Инструкция по монтажу
-
Airwell AQL 80Инструкция по эксплуатации
-
Airwell AQL 70Инструкция по монтажу
Learn essential guidelines for safely transporting, handling, and storing equipment to prevent damage and ensure longevity. Follow these tips for optimal care.