Philips 26HFL3381D [39/51] Assign a channel decoder
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Philips 26HFL3381D [39/51] Assign a channel decoder

Philips 26HFL3381D [39/51] Assign a channel decoder
36 EN
Assign a channel decoder
Before using a SCART digital channel decoder,
select the channel to decode and assign the
decoder to EXT 1 or EXT 2.
1 While watching TV, press (Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The » [Setup] menu appears.
4 Press the Navigation buttons to select
[Installation] > [Decoder] > [Channel].
5 Press the Navigation buttons to select
[Status], then the location of the decoder
(eg. EXT 1 or EXT 2).
6 Press OK
The decoder is assigned.»
Use Philips EasyLink
Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
Note
The EasyLink-compliant device must be
switched on and selected as the source.
Insert and activate a CAM
Caution
Be sure to follow the instructions described
below. Wrong insertion of a CAM may
damage both the CAM and your TV.
1 Switch off the TV.
2 Following the directions printed on the
CAM, gently insert the CAM into the
COMMON INTERFACE at the side of
the TV.
3 Push the CAM in as far as it will go.
4 Turn on the TV and wait for the CAM
to be activated. This may take several
minutes. Do not remove the CAM from
the slot when in use — removing the
CAM will deactivate digital services.
Access CAM services
1 After inserting and activating the CAM,
press OPTIONS.
The options menu appears.»
2 Press the Navigation buttons to select
[Common interface].
3 Press OK.
A list of CAM applications appears.»
4 Press the Navigation buttons to select a
CAM application.
5 Press OK
The selected CAM application is »
enabled.

Содержание

Похожие устройства

Insert and activate a CAM n Caution Be sure to follow the instructions described below Wrong insertion of a CAM may damage both the CAM and your TV 1 Switch off the TV 2 Following the directions printed on the CAM gently insert the CAM into the COMMON INTERFACE at the side of the TV Assign a channel decoder Before using a SCART digital channel decoder select the channel to decode and assign the decoder to EXT1 or EXT 2 1 While watching TV press 6 Home The home menu appears 2 Press the Navigation buttons to select Setup 3 Press OK The Setup menu appears 4 Press the Navigation buttons to select Installation Decoder Channel 5 Press the Navigation buttons to select Status then the location of the decoder eg EXT 1 or EXT 2 6 Press OK to confirm your choice The decoder is assigned 3 Push the CAM in as far as it will go 4 Turn on the TV and wait for the CAM to be activated This may take several minutes Do not remove the CAM from the slot when in use removing the CAM will deactivate digital services Access CAM services 1 After inserting and activating the CAM press OPTIONS The options menu appears 2 Press the Navigation buttons to select Use Philips EasyLink Your TV supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI connectors can be controlled by a single remote control s Note Philips does not guarantee 100 interoperability with all HDMI CEC devices Common interface 3 Press OK A list of CAM applications appears 4 Press the Navigation buttons to select a CAM application 5 Press OK to confirm your choice The selected CAM application is enabled 36 EN s Note The EasyLink compliant device must be switched on and selected as the source

Скачать