Home
Главная
Philips
Телевизор
26HFL3381D
Инструкция по эксплуатации Страница: 45

Philips 26HFL3381D [45/51] Hdmi connection issues

42 EN

Sound issues

There is a picture but sound quality is poor:

Note

If no audio signal is detected, the TV

automatically switches the audio output off

— this does not indicate malfunction.

Check that all cables are properly

connected.

Check that the volume is not set to 0.

Check that the sound is not muted.

Check that the TV speakers setting is on

in the sound menu.

Check that the TV audio output is

connected to the audio input on the

HDMI CEC enabled/EasyLink-compliant

HTS device. Sound should be heard from

the HTS speakers.

There is a picture but the sound quality is

poor:

Check that the sound settings are

correctly set.

There is a picture but sound comes from one

speaker only:

Verify that sound balance is set to the

centre.

HDMI connection issues

There are problems with HDMI devices:

Note that HDCP support can delay the

time taken for a TV to display content

from a HDMI device.

If the TV does not recognize the HDMI

device and no picture is displayed, try

switching the source from one device to

another and back again.

If there are intermittent sound

disruptions, check that output settings

from the HDMI device are correct.

If a HDMI-to-DVI adaptor or HDMI to

DVI cable is used, check that an additional

audio cable is connected to AUDIO L/R

or AUDIO IN (mini-jack only).

There is poor TV reception from an antenna

connection:

Check that the antenna is properly

connected to the TV.

Loudspeakers, unearthed audio devices,

neon lights, high buildings and other large

If possible, try to improve the reception

quality by changing the antenna direction

or moving devices away from the TV.

If reception on only one channel is poor,

There is poor picture quality from connected

devices:

Check that the devices are connected

properly.

Check that the picture settings are

correctly set.

The TV did not save your picture settings:

Check that the TV location is set to the

home setting. This mode offers you the

big or too small:

Try using a different picture format.

The picture position is incorrect:

Picture signals from some devices may

signal output of the device.

The picture from broadcasts is scrambled:

You may need to use a Conditional

Access Module to access content. Check

with your operator.

An “e-sticker” banner displaying information

appears on the TV display:

The TV is in [Shop] mode. Remove the

e-sticker by setting the TV to [Home]

mode. In the [Home] menu, select

[Setup] > [Installation] > [Preferences]

> [Location] menu. It is necessary to

switch the TV to standby to ensure that

the TV exits [Shop] mode completely.

Содержание

Похожие устройства

There is poor TV reception from an antenna connection Check that the antenna is properly connected to the TV Loudspeakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices Check that the devices are connected properly Check that the picture settings are correctly set The TV did not save your picture settings Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small Try using a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device The picture from broadcasts is scrambled You may need to use a Conditional Access Module to access content Check with your operator An e sticker banner displaying information appears on the TV display The TV is in Shop mode Remove the e sticker by setting the TV to Home mode In the Home menu select Setup Installation Preferences Location menu It is necessary to switch the TV to standby to ensure that the TV exits Shop mode completely 42 EN Sound issues There is a picture but sound quality is poor Note If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction Check that all cables are properly connected Check that the volume is not set to 0 Check that the sound is not muted Check that the TV speakers setting is on in the sound menu Check that the TV audio output is connected to the audio input on the HDMI CEC enabled EasyLink compliant HTS device Sound should be heard from the HTS speakers There is a picture but the sound quality is poor Check that the sound settings are correctly set There is a picture but sound comes from one speaker only Verify that sound balance is set to the centre HDMI connection issues There are problems with HDMI devices Note that HDCP support can delay the time taken for a TV to display content from a HDMI device lithe TV does not recognize the HDMI device and no picture is displayed try switching the source from one device to another and back again If there are intermittent sound disruptions check that output settings from the HDMI device are correct Ifa HDMI to DVI adaptor or HDMI to DVI cable is used check that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack only

Скачать