Aspen pumps Cold Cabinet Pump [2/6] Cold cabinet st st

Aspen pumps Cold Cabinet Pump [2/6] Cold cabinet st st
Description:
The pump is designed to collect condensate
water from dairy type chiller cabinets. The pump
is triggered by a float switch arrangement, and
will discharge the condensate to a maximum
level of 35 metres.
There is a low current safety float switch giving
normally closed contacts to enable the plant to
be switched off or an alarm sounded in the
event of a pump failure.
Installation Notes:
This pump is designed to sit level on its base.
Ensure that there are no kinks or trapped parts
in the discharge piping, which must have an
internal diameter of 9mm and be secured to
the pump outlet with a clamp.
IMPORTANT:
The safety switch should always be utilised.
Service Guide:
Flush the pump through with anti-bacterial
wash every 6 months or more often if required
to avoid sludge build up.
N.B. The contractors should satisfy themselves
that any chemicals used are compatible with
the pump.
For further help contact Aspen Pumps.
GB
Technical Specification:
Q Stainless steel tank/covers
Q Tank capacity: 11 litres
Q Maximum water flow rate:
225 litres per hour
Q Maximum recommended head:
35 metres
Q Thermally protected motor
Q 230V continuously rated motor
Q 75 W max. 0.35 A max.
Q High level safety switch
Q Inlet hole to lid: 50mm ø
(side inlet option also available)
Q Outlet hose connection: 9.5mm ø
Q Strainer to catch debris
Q Water temperature: 0°C to 75°C
Dimensions:
Height: 100mm Width: 585mm
Depth: 400mm Weight: 7.8kg
Electrical Connections:
Brown: Live
Blue: Neutral
Green/yellow: Earth
Black: N/C
Black: Common
Suitable for dairy type
chiller cabinets
4
3
2
1
0
010203040
FLOW IN LITRES/MIN
TYPICAL PERFORMANCE
METRES HEAD
Cold
Cabinet
(St/St)

Содержание

Похожие устройства

Скачать