Beko WRE 6511 BWW [44/52] Warning

Содержание

1 Close the taps 2 Remove the nuts of the water intake hoses to access the filters on the water intake valves Clean them with an appropriate brush If the filters are too dirty take them out by means of pliers and clean them 3 Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water 4 Replace the gaskets and filters carefully in their places and tighten the hose nuts by hand 5 5 Draining remaining water and cleaning the pump filter The filter system in your machine prevents solid items such as buttons coins and fabric fibers clogging the pump impeller during discharge of washing water Thus the water will be discharged without any problem and the service life of the pump will extend If the machine fails to drain water the pump filter is clogged Filter must be cleaned whenever it is clogged or in every 3 months Water must be drained off first to clean the pump filter In addition prior to transporting the machine e g when moving to another house and in case of freezing of the water water may have to be drained completely WARNING If the product is not in use turn the tap off detach the supply hose and drain the water inside the machine against any freezing possibility in the region of installation WARNING After each use close the supply hose tap of the product WARNING Foreign substances left in the pump filter may damage your machine or may cause noise problem Please check and if necessary clean your pump filter In order to clean the dirty filter and discharge the water 1 Unplug the machine to cut off the supply power WARNING Temperature of the water inside the machine may rise up to 90 C To avoid burning risk clean the filter after the water in the machine cools down 2 Open the filter cap 3 Some of our products have emergency draining hose and some does not have Follow the steps below to discharge the water Discharging the water when the product has an emergency draining hose a Pull the emergency draining hose out from its seat b Place a large container at the end of the hose Drain the water into the container by pulling out the plug at the end of the hose When the container is full blockthe inlet of the hose by replacing the plug After the container is emptied repeat the above procedure to drain the water in the machine completely 44 EN Washing Machine User s Manual