Kuppersberg GS 6020 [10/33] Starting a washing programme wash cycle table

Kuppersberg GS 6020 [10/33] Starting a washing programme wash cycle table
18 19
TECHNICAL PASSPORT ENGLISH ENGLISH TECHNICAL PASSPORT
Dishwasher Dishwasher
6. STARTING A WASHING PROGRAMME
Wash cycle table
Program Cycle Selection Information
Description of
Cycle
Detergent
Pre/main
Running
Time
(min)
Energy
(kWh)
Water
(L)
Intensive
For the heaviest soiled loads, such as
pots, pans, casserole dishes and dishes
that have been sitting with dried food
on them for a while.
Pre-wash
Main wash (60°C)
Rinsel
Rinse2
Hot rinse
Drying
5/30
(or 3 in 1)
171 1.50 18
Eco
(*EN50242)
(Standard
Programme)
For normally soiled loads, such as pots,
plates, glasses and lightly soiled pans.
standard daily cycle.
Pre-wash
Main wash (46°C)
Rinse
Hot rinse
Drying
5/30
(or 3 in 1)
151 1.06 14
Light
Light wash cycle to be used for more
delicate items which are sensitive
to high temperatures.(Run cycle
immediately after use)
Pre-wash
Main wash (45°C)
Rinse
Hot rinse
Drying
5/20
( or 3 in 1)
147 0.95 14
Crystal
For lightly soiled loads, such as plates,
glasses, bowls and lightly soiled pans.
Main wash (40°C)
Rinse
Hot rinse
Drying
5/20 118 0.90 11
Rapid
A shorter wash for lightly soiled loads
that do not need drying.
Main wash (40°C)
Hot rinse
15 36 0.55 7
Pre-Rinse
To rinse dishes that you plan to wash
later that day
Pre-wash / 11 0.01 4
60 min
For lightly and normally soiled plates
and pans for everyday
Hot rinse 1
Hot rinse 2
Hot rinse (60°C)
Drying
5/20 60 1.00 11.5
* EN 50242: this program is the test cycle
The information for comparability test in accordance with EN50242,as follows:
-Capacity: 14 settings
-Position of upper basket: Lower position
-Rinse aid setting: 5 ( or 4 for four setting dispenser)
Turning on the Appliance
Starting a wash cycle...
Draw out the lower and upper basket, load the dishes and
1. push them back. It is recommended to load the lower basket fi rst, then the
upper one (see the section entitled «Loading the Dishwasher»). Pour in the
detergent (see the section entitled «Salt, Detergent and Rinse Aid»).
2. Insert the plug into the socket. The
power supply is 220-240V AC 50 Hz,
the specifi cation of the socket is 12
A 250 VAC.50 Hz.
Make sure that the water supply is
turned on to full pressure. Open the
door, press the ON/OFF button, Press the
«program.» button to select a desired
«Wash cycle». (See the section entitled
«Wash Cycle Table») . With a little force
to ensure the door is properly closed.
NOTE: A click could be heard when
the door is closed perfectly.
When the washing is over, you can
shut off the switch by pressing ON/OFF
button.
Change the Programme.
Premise: A cycle that is underway
can only be modifi ed if it has only been
running for a short time.
Otherwise, the detergent may
have already been released, and the
appliance may have already drained
the wash water. If this is the case, the
detergent dispenser must be refi lled
(see the section entitled « Fill in the
Detergent « ).
Open the door, Press current prog.
button more than three seconds to
cancel the programme, then you can
change the programme to the desired
cycle setting (see the section entitled
«Starting a wash cycle. . . « ). Then, close
the door.
NOTE: If you open the door when
washing, the machine pauses and
warning alarm rings, the display
appears E1. When you close the door,
the machine will keep on working after
10 seconds.
The 6 programme lights show the
state of the dishwasher:
a) All program lights off --> stand by
b) One of the program lights on -->
cycle running
c) One of the program lights blinking
--> pause
NOTE: If all the lights begin to
glimmer, that indicates the machine is
out of order, please turn off the main
power and water supply before calling
a service.
Forget to Add Dish
A forgotten dish can be added any
time before the detergent cup opens.
1. Open the door a little to stop the
washing.
2. After the spray arms stop working,
you can open the door completely.
3. Add forgotten dishes.
4. Close the door, the dishwasher will
work after ten seconds.
WARNING!
It is dangerous to open the door
when washing, because the hot water
may scald you.
Switch Off the Dishwasher
The digital display appears «—» and
the buzzer rings 6 times, only in this
case the programme has ended.
1. Switch off the dishwasher by
pressing the ON/OFF button.
2. Turn off the water tap!
Open the door carefully. Hot steam
may escape when the door is opened!

Содержание