Kuppersberg GS 6020 [12/33] Troubleshooting tips

Kuppersberg GS 6020 [12/33] Troubleshooting tips
22 23
TECHNICAL PASSPORT ENGLISH ENGLISH TECHNICAL PASSPORT
Dishwasher Dishwasher
Caring for the Dishwasher
To clean the control panel, use
a lightly dampened cloth then dry
thoroughly.
To clean the exterior; use a good
appliance polish wax.
Never use sharp objects, scouring
pads or harsh cleaners on any part of
the dishwasher.
Protect Against Freezing
If your dishwasher is left in an
unheated place during the winter, ask a
service technical to:
1. Cut off electrical power to the
dishwasher.
2. Turn off the water supply and
disconnect the water inlet pipe
from the water valve.
3. Drain water from the inlet pipe and
water valve. (Use a pan to catch the
water).
4. Reconnect the water inlet pipe to
the water valve.
5. Remove the fi lter in the tub and the
bottom and use a sponge to use up
water in sump.
Cleaning the Door
To clean the edge around the door,
you should use only a soft warm,
damp rag. To prevent penetration of
water into the door lock and electrical
components, do not use a spray cleaner
of any kind.
Also, never use abrasive cleaners
or scouring pads on the outer surfaces
because they will scratch the nish.
Some papers towels can also scratch or
leave marks on the surface.
WARNING!
Never use a spray cleaner to clean
the door panel for it could damage the
door lock and electrical components. It
is not allowed to use the abrasive agent
or some paper towel because of the risk
of scratching or leaving spots on the
stainless steel surface.
How to Keep Your Dishwasher
in Shape
After Every Wash
After every wash, turn off the water
supply to the appliance and leave the
door slightly ajar so that moisture and
odors are not trapped inside.
Remove the Plug
Before cleaning or performing
maintenance, always remove the plug
from the socket. Do not run risks.
No Solvents or Abrasive Cleaning
To clean the exterior and rubber
parts of the dishwasher, do not use
solvents or abrasive cleaning products.
Use only a cloth and warm soapy
water. To remove spots or stains from
the surface of the interior, use a cloth
dampened with water and a little white
vinegar, or a cleaning product made
specifi cally for dishwashers.
When You Go on holiday
When you go on holiday, it is
recommended that you run a wash cycle
with the dishwasher empty and then
remove the plug from the socket, turn
off the water supply and leave the door
of the appliance slightly ajar. This will help the seals last longer and prevent odors
from forming in the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in the vertical position. If absolutely
necessary, it can be positioned on its back.
Seals
One of the factors that cause odors to form in the dishwasher is food that remains
trapped in the seals. Periodic cleaning with a damp sponge will prevent this.
Attention:
The installation of the pipes and electrical equipments should be done by
professionals.
WARNING
Electrical Shock Hazard!
Disconnect electrical power before installing dishwasher.
Failure to do so can result in death or electrical shock.
8. TROUBLESHOOTING TIPS
Error codes
When some malfunctions happen, the appliance will display error codes to warn you.
Codes Meanings Possible Causes
E1 Door open
The door is opened when the dishwasher
is operating
E2 Water inlet Water inlet malfunction
E3 Water drainage Water drainage malfunction
E4 Temperature sensor Temperature sensor malfunction
E5 Overfl ow/leakage Overfl ow occurs/Water leakage occurs
E6 Water leakage Water leakage occurs
E7 Heating element Abnormal heating
WARNING!
If overfl ow occurs, turn off the main water supply before calling a service. If
there is water in the base pan because of an overfi ll or small leak, the water should
be removed before restarting the dishwasher.

Содержание