Tp-Link TL-WA501G [18/44] Network

TL-WA501G 54M Wireless Access Point User Guide

)

Note:

If you select client mode in Figure 3-7 the wireless status in Figure 3-3 will change, as it showed

below:

3.3 Network

You can configure the IP parameters of Network on this page.

Figure 3-4 Network

¾ Type - Choosing dynamic IP to get IP address from DHCP server, or choosing static IP to

configure IP address manually.

¾ IP Address - Enter the IP address of your AP in dotted-decimal notation (factory default:

192.168.1.1).

¾ Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.

¾ Gateway - The gateway should be in the same subnet as your IP address.

¾ MAC Address - the physical address of the AP, as seen from the LAN. The value can't be

changed.