Tp-Link TD-W8961NB Инструкция по эксплуатации онлайн [35/87] 38824

TD-W8961NB 300Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide

• Hostname: Display the name of the DHCP client.

• IP Address: Display the IP Address of the DHCP client.

• MAC Address: Display the MAC Address of the DHCP client.

• Status: Display the status of the assigned IP Address, either Static or Auto. Static

indicates that the IP Address is bounded to the MAC Address, while Auto indicates that

the IP Address is assigned to the MAC Address automatically.

How to assign a static IP address to the client?

1). Select an IP Address from the drop-down list.

2). Enter the MAC Address of the client in the table.

• DNS Relay: If you want to disable this feature, you just need to set both Primary and

secondary DNS IP to 0.0.0.0. If you want to use DNS relay, you can setup DNS server IP

to 192.168.1.1 on their Computer. If not, the device will perform as no DNS relay.

• Primary DNS Server: Type in your preferred DNS server.

• Secondary DNS Server: Type in your preferred DNS server.

)

Note:

If Use Auto Discovered DNS Server Only is selected in DNS Relay, this router will accept the

first received DNS assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s)

during the connection establishment. If Use User Discovered DNS Server Only is selected in

DNS Relay, it is necessary for you to enter the primary and optional secondary DNS server IP

addresses. After type in the address, click SAVE button to save it and invoke it.

¾ DHCP Relay: Select Relay, then you will see the next screen (shown in Figure 4-13), and the

Router will work as a DHCP Relay. A DHCP relay is a computer that forwards DHCP data

between computers that request IP addresses and the DHCP server that assigns the

addresses. Each of the device's interfaces can be configured as a DHCP relay. If it is enabled,

the DHCP requests from local PCs will forward to the DHCP server runs on WAN side. To

have this function working properly, please run on router mode only, disable the DHCP server

on the LAN port, and make sure the routing table has the correct routing entry.

Figure 4-13

• DHCP Server IP for Relay Agent: Enter the DHCP server IP Address runs on WAN

side.