Tp-Link TD-W8901G Инструкция по эксплуатации онлайн [40/73] 16819

TD-W8901G 54Mbps Wireless ADSL2+ Modem Router User Guide

Figure 4-19

5) WPA-PSK/WPA2-PSK

To configure WPA-PSK/WPA2-PSK settings, select the WPA-PSK/WPA2-PSK option from

the drop-down list. The menu will change to offer the appropriate settings.

WPA-PSK/WPA2-PSK requires a shared key and does not use a separate server for

authentication. PSK keys can be ASCII or Hex type. WPA-PSK/WPA2-PSK is more flexible

than WPA-PSK or WPA2-PSK.

Figure 4-20

¾ WDS Settings: Select On/Off to enable/disable WDS. With this function enabled, the Router

can bridge two or more WLANs.

• MAC Address: Enter the MAC Address you wish to bridge in the field.

¾ Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses

of the wireless devices transmitting within your network’s RADIUS.

• Active: If you wish to filter users by MAC Address, select “Activated”, and “Deactived” for

don’t.

• Action: To filter wireless users by MAC Address, select “Allow Association” or “Deny

Association” the follow Wireless LAN station(s) association.

• MAC Address: Enter the MAC Address you wish to filter in the field.

)

Note:

For most users, it is recommended to use the default Wireless LAN Performance settings. Any

changes made to these settings may adversely affect your wireless network. Under certain

circumstances, changes may benefit performance. Carefully consider and evaluate any changes

to these wireless settings.