Beko CE 56100 [41/72] Operating the gas burners to obtain maximum efficiency

Содержание

Part 4 Operating the top burners Use of top gas burners 4 1 Operating the gas burners To obtain maximum efficiency Turn the relevant knob by slightly pressing in counter clockwise direction The large flame on the knob corresponds to A correct use to burner maximum capacity position and the small results in gas saving and flame corresponds to minimum capacity better out put Therefore we position recommend to use saucepans whose base Ignition by button In models with ignition completely cover the flames Four saucepans with It provides automatic ignition When the button is pressed and released all plugs spark at the same time The ignition starts at the burner through which the gas flows If an ignition does not occur repeat the same action Holding the button at pressed position does not provide ignition much smaller diameters to be put auxiliary burner use the pan support adaptor If your cooker has flame failure device on gas burners Flame failure device In case of any flame failures with any reasons Ignition from the knob In models with ignition in the top burners the flame failure device You immediately cuts of the gas flow It is also a direction safety device for the wrong use of the children immediately should by turn the knob pressing The on the burners to counter clockwise spark till occurs you take itself your hand off the knobs After you release the knob if the ignition does not continue repeat the same process by keeping the knob pressed for 15 seconds If still no ign ton occurs wait for 1 minute and repeat again You should turn the knob to the counter clockwise direction by pressing You should ignite by pressing the knob and wait for its ignition You should keep the knob at pressed position for Warning Do not keep the knob in pressed position more than 15 seconds 3 5 seconds after you see the flame around the burner Repeat the sequence of operations if the flame does not continues 7