Beko CE 56100 [63/72] Catalytic enamelled models

Содержание

Oven interior Control panel Before switching on again ensure that all controls are in the OFF Wipe over the control panel with a damp cloth and polish with a dry position Take out all trays and the grill out of the oven Clean cloth Do not use oven cleaners or aerosols scouring pads or abrasive out the interior with a piece of moist soapy cloth Then clean powder for cleaning the plastic knobs as damage will occur Do not it once more with a wet piece of cloth and let it to dry attempt to remove any of the control knobs from the panel as this Do not use dry powder agents for cleaning may cause damage and is a safety hazard Special cleaners that are commercially available may be used Oven door after carefully reading the warning that are written on the labels Wipe over the door outer panel with a cloth wrung out in hot soapy Warning water then after wiping with a Never clean the inside of the oven and trays with hard brushes cloth wrung out in clear water Do not use scouring pads or abrasive steel pads or knives powder which may scratch the surface Take care during cleaning Special cleaners that are commercially avaible may be used after not to damage or distort the door seal carefully reading the warning that are written on the labels Replacing the oven lamp IF AVAILABLE Catalytic enamelled models The oven interior of this model is coated with catalytic enamel since the catalytic 1 Unplug the power cable 2 Then remove theprotective enamel cleans itsellf you do not have to perform an extra glass cover of the lamp inside your oven by turning it cleaning after the cooking operation counterclockwise 3 Then remove the bulb by turning it counterclockwise 4 After installing the If your oven obtains steel rack correct bulb obtained To clean the steel rack unscrew the 4 from an Authorized Service screws After cleaning operation assemble reinstall the protective glass of the lamp the steel rack to the oven body again 29