Tp-Link TD-8810 Инструкция по эксплуатации онлайн [61/80] 16778

TD-8810 ADSL2+ Modem Router User Guide

Figure 4-33

To add a new entry, follow the steps below.

1. Click the Add button in Figure 4-33 to go to the St

atic Route Add page as shown in Figure

4-34.

2. Enter the IP address of the destination network. This parameter specifies the IP network

address of the final destination.

3. Enter the Subnet Mask for the destination.

4. Select the Use Gateway IP Address checkbox and enter the IP address of the gateway.

The gateway is an immediate neighbor of your ADSL Router that will forward the packet to

the destination. On the LAN, the gateway must be a router on the same segment as your

Router; over Internet (WAN), the gateway must be the IP address of one of the remote

nodes.

5. Click Save/Apply to save your configurations. Then you will go back to Figure 4-33 and

see your ne

w entry