D-Link DGS-1005D [10/18] A mounting on a cement wall

OUNTING THE

WITCH ON A

ALL

The DGS-1005D can also be mounted on a wall. Two mounting slots are provided

on the bottom of the switch for this purpose. T3 x 15L screws and Nylon

screw anchors are not provided. Please make sure that the front panel is exposed

in order to view the LEDs. Please refer to the illustration below:

A.) Mounting on a cement wall

1. Mount the Nylon screw anchors into a cement wall.

2. Drive the T3 x 15L screws into the Nylon screw anchors.

3. Hook the mounting holes of the switch back on the screws; you have

completed the wall-mount.

B.) Mounting on a wood wall

1. Drive the T3 x 15 L screws into the wood wall.

2. Hook the mounting holes of the switch back on the screws; you have

completed the wall-mount.

(1) 3/4 inch minimum

for wood wall

(2) 3 inch minimum

for cement

wall.