D-Link DES-2108/E/B [74/199] Configure switch

24-port NWay Ethernet Switch User’s Guide

60 Using the Console Interface

management, starting from the next time the Switch is

restarted. In this field, you can toggle between SLIP or

console port type settings.

♦ Baud Rate Determines the serial port bit rate that will be

used the next time the Switch is restarted. Applies only when

the serial port is being used for out-of-band (SLIP)

management; it does not apply when the port is used for the

console port. Available speeds are 2400, 9600, 19,200 and

38,400 bits per second. The default setting in this Switch

version is 9600.

The top of the screen displays the current settings for Console

Timeout and Serial Port as well as the Baud Rate,

Character Size, and Stop Bit for Out of Band and Console

settings, respectively.

Configure Switch

The Switch Configuration screen shows various pieces of

information about your Switch, and allows you to set the System

Name, System Location, and System Contact. These settings

can be retrieved from the Switch using SNMP requests, allowing

these settings to be used for network management purposes.

Choose Configure Switch to access the second item on the

Configuration menu. The following screen appears:

Удалено: Using the Console

Interface