D-Link DGS-3420-26SC [183/338] Create authen server_group

DGS-3312SR Layer 3 Gigabit Switch

177

show authen server_host

Description This command is used to view user-defined authentication server

hosts previously created on the switch.

The following parameters are displayed:

IP address – The IP address of the authentication server host.

Protocol – The protocol used by the server host. Possible results will

include tacacs, xtacacs, tacacs+ and radius.

Port – The virtual port number on the server host. The default value is

49.

Timeout - The time in seconds the switch will wait for the server host

to reply to an authentication request.

Retransmit - The value in the retransmit field denotes how many

times the device will resend an authentication request when the

TACACS server does not respond. This field is inoperable for the

tacacs+ protocol.

Key - Authentication key to be shared with a configured TACACS+

server only.

Parameters None.

Restrictions Only administrator-level users can issue this command.

Example usage:

To view authentication server hosts currently set on the switch:

DGS-3312SR:4#show authen server_host

Command: show authen server_host

IP Address Protocol Port Timeout Retransmit Key

--------------- -------- ----- ------- --------------- --------

10.53.13.94 TACACS 49 5 2 No Use

Total Entries : 1

DGS-3312SR:4#

create authen server_group

Purpose Used to create a user-defined authentication server group.

Syntax

create authen server_group <string 15>

Description This command will create an authentication server group. A server

group is a technique used to group