D-Link DGS-3420-26SC [217/338] Config radius add

DGS-3312SR Layer 3 Gigabit Switch

211

config radius add

will have a higher authenticative priority

<server_ip> − The IP address of the RADIUS server.

key − Specifies that a password and encryption key will be used

between the switch and the RADIUS server.

 <passwd 32> − The shared-secret key used by the

RADIUS server and the switch. Up to 32 characters can be

used.

default − Uses the default udp port number in both the

“auth_port” and “acct_port” settings.

auth_port <udp_port_number> − The UDP port number for

authentication requests. The default is 1812.

acct_port <udp_port_number> − The UDP port number for

accounting requests. The default is 1813.

Restrictions Only administrator-level users can issue this command.

Example usage:

To configure the RADIUS server communication settings:

DGS-3312SR:4#config radius add 1 10.48.74.121 key dlink default

Command: config radius add 1 10.48.74.121 key dlink default

Success.

DGS-3312SR:4#

config radius delete

Purpose Used to delete a previously entered RADIUS server configuration.

Syntax

config radius delete <server_index 1-3>

Description

The config radius delete command is used to delete a previously

entered RADIUS server configuration.

Parameters

<server_index 1-3> − A number identifying the current set of

RADIUS server settings the user wishes to delete. Up to 3 groups

of RADIUS server settings can be entered on the switch.

Restrictions Only administrator-level users can issue this command.

Example usage:

To delete previously configured RADIUS server communication settings: