D-Link DI-724P+ Инструкция по эксплуатации онлайн [17/102] 40977

Using the Conguration Menu (continued)

Home > WAN > PPPoE continued

Home > LAN

LAN is short for Local Area Network. This is considered your internal network. These are

the IP settings of the LAN interface for the DI-724P+. These settings may be referred to

as Private settings. You may change the LAN IP address if needed. The LAN IP address

is private to your internal network and cannot be seen on the Internet.

Auto-reconnect-

If enabled, the device will automatically connect to your ISP after

your unit is restarted or when the connection is dropped.

MTU (Maximum

Transmission

Unit)

You may need to change the MTU setting to conform to your

ISP. The default setting is 1492.

Local Domain-

This eld is optional. Enter in the local domain name.

Subnet Mask-

The subnet mask of the LAN interface.

The default subnet mask is 255.255.255.0

IP Address-

The IP address of the LAN interface. The default IP address

is: 192.168.0.1

Maximum Idle

time

The amount of time of inactivity before the device will disconnect

your PPPoE session. Enter a Maximum Idle Time (in minutes)

to dene a maximum period of time for which the Internet con-

nection is maintained during inactivity. If the connection is in-

active for longer than the dened Maximum Idle Time, then the

connect ion will be dropped. Either set the value for idle time to

zero or enable Auto-reconnect to disable this feature.