D-Link DI-724P+ Инструкция по эксплуатации онлайн [89/102] 40977

How can I use eDonkey behind my D-Link Router?

Frequently Asked Questions (continued)

You must open ports on your router to allow incoming trafc while using eDonkey.

eDonkey uses three ports (4 if using CLI):

4661 (TCP) To connect with a server

4662 (TCP) To connect with other clients

4665 (UDP) To communicate with servers other than the one you are connected to.

4663 (TCP) *Used with the command line (CLI) client when it is congured to allow

remote connections. This is the case when using a Graphical Interface (such as the

Java Interface) with the client.

Step 1 Open your web browser and enter the IP Address of your router

(192.168.0.1). Enter username (admin) and your password (leave blank).

Step 2 Click on Advanced and then click Firewall.

Step 3 Create a

new rewall rule:

Click Enabled.

Enter a name

(edonkey).

Click Allow.

Next to Source,

select WAN

under interface.

In the rst box,

enter an *. Leave

the second box

empty.

Next to

Destination,

select LAN under

interface. Enter

the IP Address

of the computer

you are running

eDonkey from.

Leave the second

box empty. Under Protocol, select *. In the port range boxes, enter 4661 in the rst

box and then 4665 in the second box. Click Always or set a schedule.

Step 4 Click Apply and then Continue.