Kaiser EH 6963 [6/60] Installation instructions

INSTALLATION INSTRUCTIONS

ELECTRICAL CONNECTION

Before connecting the oven to the mains power

supply, make sure that:

•

The supply voltage corresponds to the

specifications on the data plate on the front

of the oven.

• The

mains supply has an efficient ground

connection complying with all applicable

laws and regulations.

Correct grounding is a legal requirement. If the

appliance is not pre-

fitted with a power cable

and/or plug, use only suitable cables and plugs

capable of

handling the power specified on the

appliance's data plate and capable of resisting

heat. The power cable should never reach a

temperature 50

°C above ambient temperature at

any point along its length.

If the appliance is to be connected directly to

ains terminals, fit a switch with minimum

aperture of 3 mm between the contacts. Make sure

that the switch is of sufficient capacity for the

power specified on the appliance's data plate, and

compliant with applicable regulations. The switch

must not break the yellow-

green earth wire. The

socket or switch must be easily reachable with the

oven fully installed.

Attention! The manufacturer declines all

responsibility for damage or injury if the

above instructions and normal safety

precautions are not respected.

Attention! Installation and electrical

connection must be made by a qualified

expert only.