Kaiser CHEF EG 6375 Sp [14/84] Gas connection

GAS CONNECTION

The oven is designed to operate with both natural

gas (methane) and liquid gas (LPG), and can be

easily converted from one type to another following

the instructions given in the relative section of this

booklet (Conversion to a different type of gas).

At factory the appliance has been pre-installed

to natural gas.

If the appliance is to operate with gas bottles

(LPG), a pressure regulator conforming to the

requirements.

On the pipe 1 is a nut 2, with a fixed service-

adapter 3, which is for gas service personal only.

The gas connection with this adapter is prohibited.

Before connecting the gas the service-adapter 3

has to be removed.

Rigid pipe connection

Connection to the mains gas supply may be made

via a metal pipe which is tightly connect to the pipe

1 or via a rigid stainless steel pipe, or via a flexible

steel-tipped hose 4 firmly attached to the fitting 5.

When connecting to LPG, use fitting 6 instead of

fitting 5

The fittings 5 and 6 with seal are supplied with the

appliance, and comply with standards.

The gas fitting 5

should be turned to the optimal

direction for installation and gas connection.

Important:

Use two wrenches to turn the fitting 5

to the

required position. When the fitting is in the desired

position, firmly tighten nut 2

Attention! CHECK UP LEAK

PROOFNESS of the connection to the gas

supply pipe or gas cylinder using soap

suds only.

Don’t use open flame – danger to life!

Attention! Connection to the gas supply

and conversion to a different type of gas

must be carried out by qualified technicians

and in conformance with the requirements.