Timberk THU UL 23E Белый [5/24] Www timberk com electric humidifier

Timberk THU UL 23E (W) [5/24] Www timberk com electric humidifier
www.timberk.com • electric humidifier
5
Fig. 2
6.FILLING THE TANK WITH WATER
7.OPERATION OF THE UNIT
1. Remove the tank from the stand and remove the top cover from it.
2. Pour water in the reservoir no higher than the maximum water level
scale «MAX».
3. Install the top tank cover and install it on the stand.
4. Check that the tank on the stand is installed securely, then connect the
plug of the power cord to an electrical outlet.
Set the device strictly vertically on a flat, dry surface, then connect the
device to the electrical network, previously filling the reservoir with water.
Press the on / off button and select the steam output intensity (Fig. 2). The
device will turn on, the light blue work indicator will light up on the control
panel and steam will flow from the sprayer. At the very beginning of this
operation, the level of spraying can be unstable, which is caused by the
temperature difference and water quality. It will take a short time for this
process to stabilize.
Steam output intensity adjustment
In order to change the intensity of the steam output, press the button
on the control panel several times, the intensity of the steam output will
change: off, high, low.
Comfortable conditions are achieved with a relative humidity of 40 to
60%. You can determine the favorable humidity level for you by your own
sensations, or you can use a special hygrometer (not supplied) for this
purpose, which measures the relative humidity level.
Automatic shutdown in the absence of water
If the water level in the tank drops below the minimum permissible level,
the ultrasonic membrane of the device will automatically turn off, while the
red indicator lights up on the control panel. To continue the operation of
the device it is necessary to fill the reservoir with water according to item 6
«Filling the reservoir with water», then connect the device to the electrical
network.
Aroma
The device is equipped with aroma capsules. When you add aromatic oil
to it, air is aromatized. Aromatic oil is not included in the scope of supply.
Switching off the device
To turn off the device, press the button on the control panel several times,
the device will turn off, and the indicator on the control panel will turn off.
8. CLEANING AND MAINTENANCE
Before cleaning the device make sure that the plug is disconnected from
the wall outlet. Otherwise, it may result in electric shock. Before cleaning,
wait until the cooling water in the ground, so as not to burn your hands.
Spend device cleaning once or twice a week. To clean the outer surface of
the unit with a damp soft cloth. To avoid electric shock, do not scratch or
damage the device while cleaning elements.
Do not use when cleaning the device thinner, benzene, dimethyl benzene,
stiff brush, talcum powder and other materials, except water.
Wipe any remaining water inside the base with a damp, soft cloth.
To remove the remaining water in the small details, you can use a soft
brush, then wipe it again with a soft cloth.
In the formation of dirt on the membrane, clean it with a soft brushes. Use
a soft brush to erase the remnants of water on the surface of the device,
and then wipe it again with a soft cloth. Rinse water tank and a clean water
dispenser.
After removal of the residual water from the surface of the sprayer, wipe it
with a soft cloth. Clean the outside surface with a damp, soft cloth.

Содержание

Похожие устройства

Скачать