Beurer MP62 [14/96] Commencing operation

2. Commencing operation

2.1 Information concerning the instrument

This manicure and pedicure device comes with high-quality attachments. The

supplied 10 attachments are made with durable sapphire coating / polishing felt.

Together with the continuously adjustable speed regulation and right/left rotati-

on, professional foot and nail care at the standard of a pedicurist is possible.

All the attachments can be easily integrated into the storage pouch of the

MP 62.

The integrated LED light additionally creates ideal light conditions during appli-

cation.

2.2 Power supply

To ensure adequate power at all times for good and powerful treatment of the

feet and nails, this instrument is provided with a permanently attached power

unit.

After use, before cleaning and changing any accessory parts, the po-

wer unit should always be disconnected.

Ensure that the sliding switch on the device is in the centre position (=

off) before you connect the device to a power supply.

3. Application

3.1 General

– This instrument is intended only for the treatment of hands (manicure) and feet

(pedicure).

– Make sure that the device is switched off beforehand.

– Select an attachment and push it onto the instrument spindle using a slight

pressure. The attachments can be heard to engage. To remove: pull the at-

tachment and instrument apart in the axial direction (straight).

– Turn the control ring to the left (anti-clockwise rotation) or to the right (clock-

wise rotation) to switch the device on. The LED lights up blue. The two buttons

marked with plus (+) and minus (-) allow you to select the speed of rotation.

Start every application at low speed and increase it only as required.

– All file and cutting attachments are coated with a sapphire grain. This guaran-

tees extremely long life and almost guarantees freedom from wear.

– Do not exert heavy pressure and always guide the attachments carefully over

the surface to be treated.

– Move the instrument under light pressure in circular movements slowly over

the parts to be treated.

– Note that the cutting attachments will have a reduced effect if the skin is sof-

tened or moist. For this reason, do not carry out any pretreatment in a bath.