D-Link DI-304 Инструкция по эксплуатации онлайн [48/105] 41902

DI-304/DI-304M ISDN Remote Router

♦ Dial-In Service – Click Enable to allow dial-in service. Note that if you

click Disable, the router will not accept any in-coming ISDN calls.

PPP/MP Setup

♦ Dial-In PPP Authentication – There are two choices:

◊ PAP - Selecting this option will force the router to authenticate

dial-in users with the PAP protocol.

◊ PAP or CHAP - Selecting this option means the router will

attempt to authenticate dial-in users with the CHAP protocol first. If

the dial-in user does not support this protocol, it will fall back to use

the PAP protocol for authentication.

♦ Mutual Authentication (PAP) – Enable this only if the connecting router

requires mutual authentication. By default, the option is set to No.

♦ Username – Enter the mutual Authentication username.

♦ Password – Enter the mutual Authentication password.

IP Address Assignment for Dial-In Users

♦ Start IP Address – Enter a start IP address to be assigned to the dial-in

PPP connection. You should choose an IP address from the local private

network. For example, if the local private network is

192.168.1.0/255.255.255.0, you can choose 192.168.1.200 to be the Start

IP Address. Because one ISDN BRI has two independent data channels

(B-channels), it is possible to allow two dial-in users at the same time.

The first dial-in user would be assigned the start IP address and the

second would be assigned the start IP address plus 1. Click OK.

Creating an Access Account for a Dial-in User

After activating the dial-in capability, you must create an access account for each

dial-in user. From the Advanced Setup menu, click Remote Dial-In User Setup to

open the page shown below. The router provides 10 access accounts for dial-in users.